Fischer–Tropsch Synthesis: Higher Oxygenate Selectivity of Cobalt Catalysts Supported on Hydrothermal Carbons

Uschi M. Graham,Gary Jacobs,Muthu K. Gnanamani,Stephen M. Lipka,Wilson D. Shafer,Christopher R. Swartz,Thani Jermwongratanachai,Rong Chen,Fon Rogers,Burtron H. Davis
DOI: https://doi.org/10.1021/cs400965t
IF: 12.9
2014-01-01
ACS Catalysis
Abstract:The performance of carbon-supported cobalt catalysts was compared with that of Co/gamma-Al2O3 reference catalysts for the Fischer-Tropsch synthesis (FTS) reaction. The carbon support (CS) was prepared using a hydrothermal method that formed mostly spherical similar to 300-800 nm carbons that were first carbonized at 900 degrees C and then partially graphitized at 1900 degrees C. The FTS study was conducted using a continuously stirred tank reactor, and the cobalt catalysts were promoted with Pt (0.2% Pt-10% Co) to facilitate the reduction of cobalt oxides. Catalysts were prepared by an evaporative method (Co/CS-IWI) and by a chemical vapor deposition technique (Co/CS-CVD). The CVD technique led to a higher CO conversion (26.5%) relative to the conventional evaporative (IWI) method (7.4%) at the same temperature (220 degrees C) and space velocity (1.5 NL/g(cat)h). Remarkably, the Co/CS-CVD displayed a high oxygenate selectivity (similar to 10%) in comparison with cobalt alumina catalysts (i.e., including one having similar Pt and Co loadings, as well as a conventional cobalt alumina catalyst with a higher Co loading of 25% Co) at similar conversion levels. The difference in the CO conversion on a per gram catalyst basis observed between Co/CS-IWI and Co/CS-CVD catalysts was due to the smaller average Co particle size and more uniform distribution resulting from the CVD method.
What problem does this paper attempt to address?