Abstract:The ever-growing crises of fossil fuel shortage and environmental pollution urgently call for the exploration of clean and renewable energies. Fuel cells present high power efficiency and emit zero pollutants, showing great potential in the future energy system. The main bottleneck of fuel cell commercialization is the sluggish oxygen reduction reaction (ORR) at the cathode. To date, the most active electrocatalysts for ORR are platinum and its alloys. However, the scarcity, high cost and susceptibility to methanol crossover of precious metals hinder the large-scale application of fuel cells. The development of highly efficient and stable non-precious metal ORR electrocatalysts with high resistance to methanol crossover is of great significance. M/N/C (M = Fe, Co, etc.) catalysts are attractive non-precious metal based ORR electrocatalysts and their performance depends on the density of active sites on the catalyst surface. The common synthesis of M/N/C catalysts is to pyrolyze the mixture of metal salt, nitrogen-containing precursor and carbon support. However, so-synthesized catalysts usually contain large metal-based particles, leading to the shortcomings of low density and partial embedding of active sites. Graphitic carbon nitride (g-C3N4) with high concentration of pyridine-like nitrogen in heptazine heterorings can provide abundant and uniform nitrogen coordination sites, which can capture metal ions by the interaction between metal ions and N sites. In addition, g-C3N4 would be decomposed largely during pyrolysis, which is beneficial to form highly exposed M/N/C active sites by pyrolyzing the g-C3N4 with adsorbed metal ions. Herein, we reported the construction of Co/N/C electrocatalysts with highly exposed active sites. Specifically, the g-C3N4 was uniformly supported on the surface of high-conductive hierarchical carbon nanocages (hCNC) by the impregnation and pyrolysis process, leading to the formation of g-C3N4/hCNC composite. Co2+ ions were then captured by the g-C3N4 species on the surface owing to the interaction between the lone pair electrons of nitrogen and the Co2+ ions, and the subsequent pyrolysis led to the Co/N/C catalysts with highly exposed active sites, high conductivity and multiscale pore structure. The optimized catalyst obtained at 800 degrees C exhibits excellent ORR performance in alkaline medium, with a high onset potential (0.97 V) comparable to commercial Pt/C catalyst, while much better stability and high immunity to methanol crossover. This study demonstrates an effective strategy for the construction of high-efficient M/N/C catalysts with highly exposed active sites.

Performance of Nitrogen-Containing Macroporous Carbon Supported Cobalt Catalyst Synthesized Through In-Situ Construction of Catalytic Sites for Oxygen Reduction Reaction

Prevention of Active-Site Destruction During the Synthesis of High Performance Non-Pt Cathode Catalyst for Fuel Cells

Noble-metal-free Co-N-c Catalyst Derived from Cellulose-Based Poly(ionic Liquid)s for Highly Efficient Oxygen Reduction Reaction.

Co–Pyridinic-N Bond Constructed at the Interface of CoxP and N-Doped Carbon to Effectively Facilitate Oxygen Reduction

Construction of Cobalt/Nitrogen/Carbon Electrocatalysts with Highly Exposed Active Sites for Oxygen Reduction Reaction

Facile synthesis of three-dimensional Co/N co-doped carbon nanocuboid for enhanced oxygen reduction reaction

Design of M-N-C Catalyst By Spray Pyrolysis and Pseudomorphic Transformation As Efficient Electrocatalysts for Oxygen Reduction Reaction

Nitrogen-Doped Carbon Nanotubes Encapsulated Cobalt Nanoparticles Hybrids for Highly Efficient Catalysis of Oxygen Reduction Reaction

Highly efficient charge transfer in Co/Co2P Schottky junctions embedded in nitrogen-doped porous carbon for enhancing bioelectricity generation

Cobalt-nitrogen-doped Ordered Macro-/Mesoporous Carbon for Highly Efficient Oxygen Reduction Reaction

In-situ construction of three-dimensional ordered cobalt-nitrogen- carbon nanotubes integrated self-supporting electrode for efficiently electrocatalyzing oxygen reduction reaction

Nitrogen-rich carbon nitride inducing electron delocalization of Co-N 4 site to enhance electrocatalytic carbon dioxide reduction

Highly Accessible Co-Nx Active Sites-Doped Carbon Framework with Uniformly Dispersed Cobalt Nanoparticles for the Oxygen Reduction Reaction in Alkaline and Neutral Electrolytes

Controllable synthesis of nitrogen-doped carbon containing Co and Co3Fe7 nanoparticles as effective catalysts for electrochemical oxygen conversion

Tuning Cobalt and Nitrogen Co-Doped Carbon to Maximize Catalytic Sites on a Superabsorbent Resin for Efficient Oxygen Reduction

An Advanced Nitrogen‐Doped Graphene/Cobalt‐Embedded Porous Carbon Polyhedron Hybrid for Efficient Catalysis of Oxygen Reduction and Water Splitting

CoO/Co/N-C nanoparticles embedded in carbon as mediate for oxygen reduction electrocatalysts

Probing the Electro-Catalytic ORR Activity of Cobalt-Incorporated Nitrogen-Doped CNTs

Constructing Co–N–C Catalyst via a Double Crosslinking Hydrogel Strategy for Enhanced Oxygen Reduction Catalysis in Fuel Cells

Simultaneously Incorporating Atomically Dispersed Co‐Nx Sites with Graphitic Carbon Layer‐Wrapped Co9S8 Nanoparticles for Oxygen Reduction in Acidic Electrolyte

In Situ Anchoring of Zeolite Imidazole Framework-Derived Co, N-Doped Porous Carbon on Multiwalled Carbon Nanotubes Toward Efficient Electrocatalytic Oxygen Reduction