Abstract:The gradual increase of CO2 concentration in the atmosphere is believed to have a profound impact on the global climate and environment. To address this issue, strategies toward effective CO2 conversion have been CO2 developed. As one of the most available strategies, the CO2 electrochemical reduction approach is particularly attractive because the required energy can be supplied from renewable sources such as solar energy. Electrochemical reduction NNC of CO2 to chemical feedstocks offers a promising strategy for mitigating CO2 emissions from anthropogenic activities; however, a critical challenge for this approach is to develop effective electrocatalysts with ultrahigh activity and selectivity. Herein, we report the facile synthesis of a highly efficient and stable atomically isolated nickel catalyst supported by ultrathin nitrogenated carbon nanosheets (Ni-N-C) for CO2 reduction through pyrolysis of Ni-doped metal-organic frameworks (MOFs) and dicyandiamide (DCDA). MOFs are crystalline and assembled by metal-containing nodes and organic linkers, which have a large specific surface area, tunable pore size and porosity, and highly dispersed unsaturated metal centers. Thus, Ni-doped MOFs were chosen as the precursors to endow Ni-N-C with a porous carbon structure and nickel ions. The nitrogen in Ni-N-C came from DCDA, which acts as the active site to anchor nickel ions. Because of the porous structure and numerous nitrogen sites, the Ni content of Ni-N-C was as high as 7.77% (w). There were two types of nickel ion-containing structures, including Nit-N-C and Ni2+-N-C. The structure transformation of the Nit-N-C species from the initial Ni2+ (Ni-MOF) was achieved by pyrolysis, and the ratio of Ni+ and Ni2+ varied with the pyrolysis temperature. Compared to other Ni-N-C prepared at other temperatures, Ni-N-C-800 contained more Nit-N-C species that possessed the optimum *CO binding energy and thus boosted the CO desorption and evolution rate, thereby exhibiting higher CO Faradaic efficiency (FE) up to 94.6% at -0.9 V (vs. the reversible hydrogen electrode, RHE) in 0.1 moI L-1 KHCO3. In addition, it has been found that the rate of CO formation on the Ni-N-C-800 electrode relies on the electrolyte concentration. With the optimal electrolyte concentration, the Ni-N-C-800 electrode achieved a superior Faraday efficiency of > 90% for CO over a wide potential range of -0.77 to -1.07 V (vs. RHE) and displayed a CO FE as high as 97.9% with a current density of 12.6 mA cm(-2) at -0.77 V (vs. RHE) in 0.5 mol.L-1 KHCO3. After testing at -0.77 V for 12 h, the Ni-N-C-800 electrode maintained a CO FE of approximately 95%, indicating superior long-term stability. We believe that this study will contribute to the design and synthesis of highly catalytically active atomically dispersed monovalent metal sites for metal-N-C catalysts.

Nitrogen-rich carbon nitride inducing electron delocalization of Co-N 4 site to enhance electrocatalytic carbon dioxide reduction

Nitrogen-Rich Carbon Nitride Inducing Electron Delocalization of Co-N4 Site to Enhance Electrocatalytic Carbon Dioxide Reduction

Co–Pyridinic-N Bond Constructed at the Interface of CoxP and N-Doped Carbon to Effectively Facilitate Oxygen Reduction

Performance of Nitrogen-Containing Macroporous Carbon Supported Cobalt Catalyst Synthesized Through In-Situ Construction of Catalytic Sites for Oxygen Reduction Reaction

Enhancing effect of metal-nitrogen-carbon nanotubes with cobalt phthalocyanine on electrochemical reduction of CO2

Advanced Ni-Nx-C Single-Site Catalysts for CO2 Electroreduction to CO Based on Hierarchical Carbon Nanocages and S-doping

Cobalt Phthalocyanine Coordinated to Pyridine-Functionalized Carbon Nanotubes with Enhanced CO2 Electroreduction

Atomic-Dispersed Coordinated Unsaturated Nickel–Nitrogen Sites in Hollow Carbon Spheres for the Efficient Electrochemical CO2 Reduction

Ultrathin Nitrogenated Carbon Nanosheets with Single-Atom Nickel As an Efficient Catalyst for Electrochemical CO2 Reduction

Enhancing CO2 Reduction Efficiency with Axial Oxygen Coordinated Ni-N4 Active Sites on Hierarchical Pore N-doped Carbon

Precise design of nickel phthalocyanine molecular structure: Optimizing electronic and spatial effects for remarkable electrocatalytic CO 2 reduction

Diminishing the Uncoordinated N Species in Co-N-C Catalysts Toward Highly Efficient Electrochemical CO2 Reduction

Customizing pyridinic nitrogen coordination in Ni-N-C for electrocatalytic CO2reduction towards CO

Modulating Electron Density of Ni-N-C Sites by N-doped Ni for Industrial-level CO2 Electroreduction in Acidic Media

CoO/Co/N-C nanoparticles embedded in carbon as mediate for oxygen reduction electrocatalysts

Cobalt Nitride Anchored on Nitrogen-Rich Carbons for Efficient Carbon Dioxide Reduction with Visible Light

Pyrrolic nitrogen coordinated Ni2+ dual-atom catalyst for boosting CO2 electroreduction

Design of Single-Atom Co-N-5 Catalytic Site: A Robust Electrocatalyst for CO2 Reduction with Nearly 100% CO Selectivity and Remarkable Stability

Nitrogen-Stabilized Low-Valent Ni Motifs for Efficient CO2 Electrocatalysis

Cobalt-nitrogen-carbon Sites on Carbon Aerogels for Enhanced Electrocatalytic CO2 Activity

Modulating Co-N Bond Length of CoPc in Situ Grown on Carbon Nanotubes for Efficient CO2 Electroreduction