Abstract:The rapid charge-discharge and wide operating temperature range are of great significance to the research of lithium-sulfur batteries. However, the poor electronic and ionic conductivity of sulfurized polyacrylonitrile limits the high-rate and low-temperature performance of lithium-sulfur batteries. In this work, a tellurium-doped sulfurized polyacrylonitrile nanofibers-based cathode material (Te 0.02 S 0.98 FPAN) is successfully fabricated by air-blow spinning for lithium-sulfur batteries. It is found that Te 0.02 S 0.98 FPAN maintained a high reversible specific capacity of 742 mAh·g −1 composites after 200 cycles at a current density of 0.2 C (0.014% decay per cycle), whereas it provides a reversible specific capacity of 641 mAh·g −1 composites after 500 cycles even at a large current density of 1.0 C (0.021% decay per cycle), manifesting its excellent high-rate performance. Moreover, Te 0.02 S 0.98 FPAN still maintained a high reversible specific discharge capacity of 586 mAh·g −1 composites after 100 cycles at 0.2 C at a low temperature of 5.0 °C, confirming its wide operating temperature range. Both the eutectic accelerator (tellurium) and the one-dimensional nanofibrous structure greatly improve the migration rate and electron transport ability of Li + ions, enhancing reaction kinetics and providing fast and stable migration channels for ions and electrons. Therefore, Te 0.02 S 0.98 FPAN has a higher oxidation-reduction reaction rate and less polarization. This study not only provides new ideas for the cathode design of lithium-sulfur batteries with high rate and wide temperature range, but also paves the way for the development of practical lithium-sulfur batteries. In particular, when tested in practical conditions of high areal loading (Te 0.02 S 0.98 : 5.0 mg cm −2 ) and lean electrolyte (E/Te 0.02 S 0.98 : 10 μL mg −1 ), this cathode delivers high reversible capacities of 725 mAh g −1 composite (0.1 C) and 663 mAh g −1 composite (0.2 C), demonstrating its great potential for future application.

Manipulating Kinetics of Sulfurized Polyacrylonitrile with Tellurium As Eutectic Accelerator to Prevent Polysulfide Dissolution in Lithium-Sulfur Battery under Dissolution-Deposition Mechanism

High Performance Room Temperature Sodium–Sulfur Battery by Eutectic Acceleration in Tellurium-Doped Sulfurized Polyacrylonitrile

Se As Eutectic Accelerator in Sulfurized Polyacrylonitrile for High Performance All-Solid-state Lithium-Sulfur Battery

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

Electrochemical Polymerization of Nonflammable Electrolyte Enabling Fast-Charging Lithium-Sulfur Battery

Construction of high-rate performance sulfurized Poly(acrylonitrile) nanofibers cathodes for practical lithium–sulfur batteries via tellurium catalytic regulation

Selective Catalysis Remedies Polysulfide Shuttling in Lithium-Sulfur Batteries.

Polysulfide-Scission Reagents for the Suppression of the Shuttle Effect in Lithium-Sulfur Batteries.

Accelerating Sulfur Redox Reactions by Topological Insulator Bi 2 Te 3 for High‐Performance Li‐S Batteries

Sulfurized polyacrylonitrile as cathodes for advanced lithium–sulfur batteries: advances in modification strategies

Tin Disulfide Embedded on Porous Carbon Spheres for Accelerating Polysulfide Conversion Kinetics Toward Lithium-Sulfur Batteries.

Inhibition of Polysulfides Dissolution and Shuttling by Solid Electrolyte and Macro-Structural Cathode for Lithium-Sulfur Batteries

Leveraging doping strategies and interface engineering to enhance catalytic transformation of lithium polysulfides for high-performance lithium-sulfur batteries

One-step synthesis of nano-S/C@PANI composites for lithium-sulfur batteries with high rate and long lifespan

Enabling Rapid Polysulfide Conversion Kinetics by Using Functionalized Carbon Nanosheets As Metal-Free Electrocatalysts in Durable Lithium-Sulfur Batteries

Achieving High-Performance Lithium-Sulfur Batteries by Modulating Li+ Desolvation Barrier with Liquid Crystal Polymers

Superior Rate Capability of a Sulfur Composite Cathode in a Tris(trimethylsilyl)borate-Containing Functional Electrolyte.

Crosslinked Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials for Rechargeable Lithium Batteries

Accelerating Sulfur Redox Reactions by Topological Insulator Bi2Te3 for High‐Performance Li‐S Batteries

Bidirectional tandem catalysis coupled with interface engineering and Se vacancies for accelerating the polysulfide conversion

Interfacial "Double-Terminal Binding Sites" Catalysts Synergistically Boosting the Electrocatalytic Li2S Redox for Durable Lithium-Sulfur Batteries