Abstract:Ellipsoidal and torispherical heads, whose geometric shapes are close, are usually used as end closures of internally pressurized vessels. In pressure vessel codes, for example, ASME BPVC Section VIII, ellipsoidal heads are designed as torispherical heads using geometric equivalency approaches. However, the difference between ellipsoidal and equivalent torispherical heads has not been studied in detail. In this paper, we first investigate the shape deviation between the two types of heads. Then we compare the elasticplastic behaviors between ellipsoidal and equivalent torispherical heads as well as their failure modes, i.e., buckling and plastic collapse. It is found that ellipsoidal heads have more buckling resistance than equivalent torispherical heads, indicating that the current design rules for buckling failure based on the geometric equivalency approaches result in uneconomical design. Nevertheless, the shape deviation has little effect on plastic collapse pressures of ellipsoidal and equivalent torispherical heads, showing that the geometric equivalency approaches are applicablefor such heads thatfail by plastic collapse (bursting). In addition, the experimental and numerical results show that such heads experience geometric strengthening. The FE method considering the effect of geometric strengthening provides a good prediction about plastic collapse (bursting) pressure. However, the current design equation for bursting does not consider the effect ofgeometric strengthening, also leading to uneconomical design. Therefore, in order to avoid uneconomical design, we recommend that (1) with respect to the buckling of ellipsoidal heads, a new design equation be proposed rather than implementing the geometric equivalency approaches, and (2) the current design equation for bursting be deleted, and a new design equation, considering the effect of geometric strengthening, be proposed for the bursting of ellipsoidal and torispherical heads subjected to internal pressure.

A Creep Buckling Design Method of Elliptical Heads Based on the External Pressure Chart

Comparison of design methods for internally pressurized ellipsoidal head

A new formula to predict buckling pressure of steel ellipsoidal head under internal pressure

COMPARISON OF ELLIPSOIDAL AND EQUIVALENT TORISPHERICAL HEADS UNDER INTERNAL PRESSURE: BUCKLING, PLASTIC COLLAPSE AND DESIGN RULES

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

A New Method for Preventing Plastic Collapse of Ellipsoidal Head under Internal Pressure

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Evaluation of simplified creep design methods based on the case analysis of tee joint at elevated temperature

ELASTIC BUCKLING OF ELLIPTICAL CYLINDRICAL SHELLS UNDER EXTERNAL PRESSURE

New formula for predicting the plastic buckling pressure of steel torispherical heads under internal pressure

Experimental Investigation on Buckling of Ellipsoidal Head of Steel Nuclear Containment

Buckling analyses of cylindrical shells with axial variable elastic modulus under external pressure

Buckling Behavior of Large-Scale Thin-Walled Ellipsoidal Head under Internal Pressure

The Method of Design by Analysis for Cylindrical Pressure Vessels with Spherically Dished Head

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Elastic Core Concept for Modified Bree Problems Considering In-Phase and Out-of-phase Loading Conditions

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Proposal of the buckling design method by elasto-plastic buckling analysis for steel containment vessel of nuclear power plant

A Simple Formula for Prediction of Plastic Collapse Pressure of Steel Ellipsoidal Heads under Internal Pressure

Creep Analysis for Pressurized Components Under Creep Conditions Based on Isochronous Stress-Strain Curve and Elastic-Perfectly Plastic Material Model