Abstract:Ultra-high molecular weight polyethylene (PE) fiber with startling mechanical properties and elastic modulus is considered as an ideal reinforcing component for Ultra-High-Strength and High-Ductility Cementitious Composites (UHS-HDCCs). However, the fiber/matrix interface bonding is weakened due to the hydrophobic nature of the PE fiber surface, restricting the perfect expression of the PE fiber inherent characteristics. In this work, a promising technology for the PE fiber surface functionalization using a combination of bio-inspired polydopamine (PDA) and deposited nano-SiO 2 was proposed to enhance the fiber/matrix interfacial bonding in UHS-HDCCs. The results showed that PDA produced a uniform coating layer on the surface of PE fiber, and nano-SiO 2 was successfully grafted to the surface of PE fiber through PDA as a bridge. The coated PDA and nano-SiO 2 layers enhanced the wettability of the PE fiber surface. Nano-SiO 2 layers provided nucleation sites and reaction raw materials for C–S–H gel. Moreover, the SiO 2 -PDA-PE fibers improved the ultimate tensile stress and tensile strain capacity of UHS-HDCCs to be 116.3% and 133.5% respectively, compared to that of UHS-HDCCs incorporating pristine PE fiber. Furthermore, the SiO 2 -PDA-PE fibers effectively reduced the crack width and crack spacing while increasing the number of cracks and energy absorption capacity of UHS-HDCCs when subjected to increasing uniaxial tensile load. The single fiber pullout results showed that both PDA-PE fibers and SiO 2 -PDA-PE fibers enhanced the peak force, chemical bond, frictional bonding stress, slip hardening coefficient, and pullout energy. Obviously, the positive effect of SiO 2 -PDA-PE fibers on the critical parameters of the fiber interface is higher than that of PDA-PE fibers except for the chemical bond. This work explored a novel way to modify the physicochemical performance of PE fiber surface for matching the strain hardening behavior of UHS-HDCCs, which is meant to guide the mix-design optimization of UHS-HDCCs.

Enhanced Interphase Between Thermoplastic Matrix and UHMWPE Fiber Sized with CNT-modified Polydopamine Coating

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Grafting Multi-Walled Carbon Nanotubes (mwcnts) into PIPD Fiber for Enhancing Mechanical and Interfacial Performance

Low-velocity Impact Behavior of UHMWPE Fabric/thermoplastic Laminates with Combined Surface Treatments of Polydopamine and Functionalized Carbon Nanotubes

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Construction of polydopamine and carbon nanotube on carbon fiber surfaces to improve the mechanical properties of CF/PLA composite

Effects of Carbon Nanotube-Polydopamine Hybridization on the Mechanical Properties of Short Carbon Fiber/polyetherimide Composites

Study on the Construction of Dopamine/Poly(ethyleneimine)/Aminoated Carbon Nanotube Multilayer Films on Aramid Fiber Surfaces to Improve the Mechanical Properties of Aramid Fibers/Epoxy Composites

Interphase of Polydopamine Hollow Nanoparticles and Its Effects on the Interface Performance of CFRP

Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites

Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites

Enhancing The Interfacial Adhesion With Rubber Matrix By Grafting Polydopamine-Carbon Nanotubes Onto Poly(P-Phenylene Terephthalamide) Fibers

Effect of PE fiber coated by polydopamine and nano-SiO2 on the strain hardening behavior of ultra-high-strength and high-ductility cementitious composites

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

Construction of an Orderly Carbon Fiber/Carbon Nanotubes Hybrid Composites by a Mild, Effective, and Green Method for Highly Interface Reinforcement

Carbon nanotubes grafted by polyurethane chains with dopamine-mediation to enhance the mechanical and damping properties of polyurethane elastomer

Optimized interfacial compatibility of carbon fiber and epoxy resin via controllable thickness and activated ingredients of polydopamine layer

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

A hybrid 1D/2D coating strategy with MXene and CNT towards the interfacial reinforcement of carbon fiber/poly(ether ether ketone) composite

Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine co-deposition for the improved interfacial adhesion