Abstract:Mechanical stresses generated during manufacturing and laying process of high voltage cables can result in degradation of insulation properties, affecting the stable operation of the transmission system. Traditional test methods for testing the effect of mechanical stress on the insulation properties of polyethylene still have some shortcomings to be explored and it is able to explain the changes of the insulation properties of polyethylene under mechanical stress from a microscopic perspective. In order to further study the effect of stress on the insulation properties of polyethylene, microstructural changes, the breakdown field strength, conductivity and charge distribution of polyethylene at different elongation rates are investigated by a combination of experimental and molecular dynamics simulations. The results show that the increase in stress leads to a decrease in crystallinity and microcrystalline size of the material decrease. The untwisting and orientation of the polyethylene molecular chains during the stretching process can create cavities, resulting in an uneven sample distribution and thickness reduction, leading to a reduction in the breakdown field strength. Meanwhile, some crystal regions are transformed into amorphous regions. The loose amorphous regions facilitate the directional migration of carriers, resulting in the increase of conductivity. When the elongation ratio is smaller, the distance between the molecular chains increases and the trap depth of the specimen becomes shallower. This facilitates the migration of ions and electrons and increases the rate of decay of the surface potential. When the stretch is further increased, the trap depth will become larger, decreasing the decay rate of the surface potential and reducing the insulation properties of the polyethylene. Meanwhile, the molecular dynamics model of semi-crystalline polyethylene was developed to observe the microstructure and energy changes during the stretching process. The conclusions in terms of tensile tests were verified from a microscopic perspective.

Attenuation loss by displacement of cladding layer due to temperature and stress in OPLC

Attenuation Investigation Influenced by the Temperature and Strain in an Optical Fiber Composite Low Voltage Cable.

Structure Optimization of Optical Fiber Composite Low Voltage Cable Based on Thermal Analysis

Power Loss Due to Temperature Rise in the Optical Unit of Optical Fiber Composite Low Voltage Cable

Comprehensive Analysis of Temperature and Stress Distribution in Optical Fiber Composite Low Voltage Cable Using Finite Element Method.

Microbending Loss Caused by Stress in Optical Fiber Composite Low Voltage Cable

Temperature Field Distribution of Optical Fiber Composite Low-Voltage Cable

The influence factors of optical fiber composite low-voltage cable (OPLC)thermal field distribution

Effect of Tensile Stress on Insulation Properties of 500 Kv EHVAC XLPE Cable under Multi-Field Ageing

Macro Bending Effect in Optical Fiber Composite Low Voltage Cable

Optimization of Multilayered Insulation Performance by Regulating Temperature-Dependent Conductivity Coefficient

Simulation Study of OPLC Optical Loss with Effect of Thermal-Strain.

The effect of frozen-in stress on fiber attenuation and a preparation method for ultra-low loss fiber

Modeling and Optimization of Laser Cladding Fixation Process for Optical Fiber Sensors in Harsh Environments

A Study on the Optical Loss Variation of Optical Fiber Splicing Part due to Environment

Effect of Thermal Ageing on Insulation Properties of 500 Kv DC XLPE Submarine Cable Insulation

Experimental Study on the Characterization of Aging Resistance Properties of Optical Cables in the Hydrogen-Containing Downhole Environment

Investigation of bending and temperature effects in optical fibers

Effects of Mechanical Stress on Insulation Structure and Performance of HV Cable

Quantifying Progressive Failure of Micro-Anchored Fiber Optic Cable–Sand Interface via High-Resolution Distributed Strain Sensing

Effect Analysis of Embedded Fiber Transmission Performance by Lamination Process