Abstract:The optical fiber composite ground wire (OPGW), serving as a ground wire and providing communication capabilities, has been widely utilized in high-voltage transmission lines in China. Considering the fault current diversion during short circuits and lightning events, OPGW is generally grounded at each tower, while in case of which the induced electromotive force on OPGW generated by the alternating current forms an induced current loop and causes energy losses in the grounding loop. The issue becomes more prominent in higher voltage levels and larger load currents. The assessment of losses before insulating OPGW is crucial data to support the economic consideration and power saving expectation for OPGW insulation retrofit of the overhead power line. To provide a valuable reference and reveal the need for insulation retrofits of the OPGW, this study investigates the induced currents along each tower-grounded OPGW and the corresponding induced power losses on the 750kV double-circuit transmission lines. The impact of various line parameters and operational conditions are discussed via the numerical simulation. The results indicate that the total losses can reach 10 6 kWh/a.km when both circuits are transmitting power at a full load of 2300 MVA. The tower span, tower grounding resistance, and the DC resistance of the OPGW are found to have minimal impact on the total power losses, although the current distribution is affected by these factors. Conductor transposition, phase sequences, and transmission load current have a significant influence on both the amplitude of the induced current and the power losses. Reverse phase sequence ABC-CBA and the symmetrical load on both sides of the circuits could obtain the lowest induced power loss.

Power Loss Due to Temperature Rise in the Optical Unit of Optical Fiber Composite Low Voltage Cable

Temperature Field Distribution of Optical Fiber Composite Low-Voltage Cable

Attenuation loss by displacement of cladding layer due to temperature and stress in OPLC

Attenuation Investigation Influenced by the Temperature and Strain in an Optical Fiber Composite Low Voltage Cable.

Structure Optimization of Optical Fiber Composite Low Voltage Cable Based on Thermal Analysis

Comprehensive Analysis of Temperature and Stress Distribution in Optical Fiber Composite Low Voltage Cable Using Finite Element Method.

The influence factors of optical fiber composite low-voltage cable (OPLC)thermal field distribution

Microbending Loss Caused by Stress in Optical Fiber Composite Low Voltage Cable

Macro Bending Effect in Optical Fiber Composite Low Voltage Cable

Investigation on Steady State Characteristics and Loss Reduction Measures of 220 Kv Power Cables

Temperature Calculation And Measurement On Power Cable Conductor Based On Equivalent Thermal Circuit And Botda

Research on the Carrier Characteristics of Power Cables Considering the Aging Status of Insulation and Semiconducting Layers

Effect of Tensile Stress on Insulation Properties of 500 Kv EHVAC XLPE Cable under Multi-Field Ageing

Thermal analysis of 22.9-kV crosslinked polyethylene cable joint based on partial discharge using fiber Bragg grating sensors

Online Monitoring Technology Distributed Optical Fiber for XLPe Cable Temperature Measurement

Characteristic of Power-transmission-induced Current and Power Loss on the OPGW of 750 kV Transmission Line System

Temperature Monitoring and Electrical Fault Warning Methods of Three-Core Submarine Cables

Interfacial Breakdown and Resistivity Characteristics of Cable Joints under Different Temperatures

Cause Analysis of Aging Ablation on Sheath of 110 Kv Single Core High Voltage Cable

Dielectric loss and partial discharge test analysis of 10 kV XLPE cable

Research on feedback type all fiber current transformer status monitoring