Abstract:Due to the peculiar physical properties, supercritical carbon dioxide (sCO2) is considered as a promising working fluid in power generation cycles with high reliability, simple structure and great efficiency. Compared with the general thermal systems, the variable properties of sCO2 make the system models obtained by the traditional modelling method more complex. Besides, the pressure distribution in the system will affect the distribution of the fluid properties, the fluid properties influencing the heat transfer process will produce an impact on the temperature distribution which will in turn affect the pressure distribution through the mass flow characteristics of all components. This contribution introduces the entransy-based power flow method to analyze and optimize a recompression sCO2 power generation system under specific boundary conditions. About the heat exchanger, by subdividing the heat transfer area into several segment, the fluid properties in each segment are considered constant. Combining the entransy dissipation thermal resistance of each segment and the energy conservation of each fluid in each segment offers the governing equations for the whole heat transfer process without any intermediate segment temperatures, based on which the power flow diagram of the overall heat transfer process is constructed. Meanwhile, the pressure drops are constrained by the mass flow characteristics of each component, and the inlet and outlet temperatures of compressors and turbines are constrained by the isentropic process constraints and the isentropic efficiencies. Combining the governing equations for the heat exchangers and the constraints for turbine and the compressors, the whole system is modeled by sequential modular method. Based on this newly developed model, applying the genetic algorithm offers the maximum thermal efficiency of the system and the corresponding optimal operating variables, such as the mass flow rate of the working fluid in the cycle, the heat capacity rate of the cold source and the recompression mass fraction under the given heat source. Furthermore, the optimization of the system under different boundary conditions is conducted to study its influence on the optimal mass flow rate of the working fluid, the heat capacity of the cold source and the maximum system thermal efficiency. The results proposes some useful design suggestions to get better performance of the recompression supercritical carbon dioxide power generation system.

Thermodynamic Analysis and Multiple System Layouts Comparison of the Supercritical CO2 Brayton Cycle for Sodium-cooled Fast Reactor with Offshore Scenes

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Exergy and Exergoeconomic Analyses Based on Recompression Cycle of the Supercritical CO2 Brayton Cycle for Sodium-cooled Fast Reactor

System Performance Analyses of Supercritical CO2 Brayton Cycle for Sodium-Cooled Fast Reactor

Preliminary design of an SCO2 conversion system applied to the sodium cooled fast reactor

Performance of supercritical Brayton cycle using CO2-based binary mixture at varying critical points for SFR applications

Optimization of supercritical nuclear power system based on sodium cooled fast reactor

Thermodynamic Analysis and Optimization of a Supercritical Carbon Dioxide (S-CO2) Recompression Cycle Coupled with a Bottoming Organic Rankine Cycle

Thermodynamic and Economic Analysis and Multi-objective Optimization of Supercritical CO2 Brayton Cycles

Supercritical CO2 Brayton Cycle Design for Small Modular Reactor with a Thermodynamic Analysis Solver

Thermodynamic Analysis Of A Sco2 Part-Flow Cycle Combined With An Organic Rankine Cycle With Liquefied Natural Gas As Heat Sink

Off-design Behavior Investigation of the Combined Supercritical CO2 and Organic Rankine Cycle

Study on Control Strategies of the MW-scale Supercritical CO2 Recompression Brayton Cycle for Lead-Cooled Fast Reactor

Thermo-economic Optimization and Part-Load Analysis of the Combined Supercritical CO2 and Kalina Cycle

Preliminary Conceptual Design and Thermo-Economic Analysis of a Combined Cooling, Heating and Power System Based on Supercritical Carbon Dioxide Cycle

Design Optimization and Off-Design Performance Analysis of One-Dimensional Supercritical CO2 Brayton Cycle

THERMODYNAMIC ANALYSIS AND SYSTEM DESIGN OF THE SUPERCRITICAL CO2 BRAYTON CYCLE FOR WASTE HEAT RECOVERY OF GAS TURBINE

Optimal Design of Supercritical CO2 Power Cycle for High Temperature Gas-Cooled Reactor

Analysis and Operation Optimization of Recompression Supercritical Carbon Dioxide Power Generation System Based on the Power Flow Method

Thermo-economic analysis and multi-objective optimization of supercritical Brayton cycles with CO2-based mixtures

Preliminary design and part-load performance analysis of a recompression supercritical carbon dioxide cycle combined with a transcritical carbon dioxide cycle