Abstract:Multicomponent high-entropy alloys (HEAs) with compositionally disordered elemental arrangement have attracted extensive attention because of their excellent mechanical properties. However, these alloys usually exhibit low strength at elevated temperatures. Recent works suggest that HEAs strengthened by L12 ordered intermetallics of the Ni3Al type possess a superior synergy of strength and ductility. The performance of such ordered-intermetallics-strengthened HEAs depends critically on the composition and deformation mechanism of the strengthening component, which will inevitably suffer partial disorder in HEAs. In this work, we study the elemental partitions and deformation mechanisms in typical multicomponent intermetallics (MCIs) based on density functional theory (DFT) calculations. Informed by experiments, the system considered in this work includes L12-type (Ni,Co,Fe)3(Al,Ti,Fe) and its six derived subsystems. We first determine the site preference of different elements in MCIs using Monte-Carlo simulations with the energies obtained from DFT calculations (DFT-MC). The results confirm that Ti prefers Al sites. In contrast, most Co and Fe atoms tend to occupy Ni sublattice. With the established elemental occupations, we build quasirandom structures with partial disorders in either or both sublattices of the L12 structures. DFT results show that incorporation of Ti in the Al sublattice dominates the increase of stable planar fault energies (γSPF) in the considered MCIs. In contrast, Co in the Ni sublattice decreases the energy cost for planar fault formation. We further uncover quantitative relations between γSPF and geometrical structures as well as electronic structures in MCIs. The analytical results show that the incorporation of Ti decreases the adaptability of (Ni,Co,Fe)3(Al,Ti,Fe) both geometrically and electronically. Specifically, we propose that γSPF can be described by the ability of the alloy to accommodate planar faults, which is measured by the interlayer spacing changes between {111} planes [Δd(111)] and charge density redistribution (Δρ) at critical points (cps). We address the fundamental understandings of the deformation behavior of MCIs by pinpointing the contributions of different species to their local geometrical and electronic structures, which pave the way for rationally designing ordered-precipitate-strengthened HEAs.

FCC-L12 Ordering Transformation in Equimolar FeCoNiV Multi-Principal Element Alloy

Non-classical nucleation of ordered L12 precipitates in the FCC based Al0.25CoFeNi high entropy alloy

Phase transformation - induced strengthening of an additively manufactured multi- principal element CrMnFeCoNi alloy

Achieving ultra-strong and ductile CoNi-based FCC multi-principal element alloys via alloying with refractory Mo and W

In Situ EBSD/DIC-based Investigation of Deformation and Fracture Mechanism in FCC- and L12-structured FeCoNiV High-Entropy Alloys

A Novel Martensitic-Like Transformation Fe-Based Multi-principal Element Alloy

Elemental partitions and deformation mechanisms of L12-type multicomponent intermetallics

Effects of Fe on L1(2) phase precipitation and mechanical properties in Al0.3CrFeCoNi high-entropy alloy br

Tailoring Mechanical and Magnetic Properties in Dual-Phase FeCoNi(CuAl)0.8 High-Entropy Alloy

Ultrastrong and ductile medium-entropy alloys via hierarchical ordering

Investigating Effect of Ordering on Magnetic-Elastic Property of FeNiCoCr Medium-Entropy Alloy

Unraveling dual phase transformations in a CrCoNi medium-entropy alloy

Insight into the Microstructure and Micromechanical Behavior and Mechanism of the Constitutional Phase of FeNiCrAl0.63 Multi-Principal Element Alloy

Effects of Fe on L12 phase precipitation and mechanical properties in Al0.3CrFeCoNi high-entropy alloy

Cyclic Deformation Behavior of an Equiatomic CrFeNi Multi-Principal Element Alloy

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

Effects of Fe on microstructure and mechanical properties of CoCrNiFeAl multi-principle elements alloys

Fe-50Ni alloy with ordered L10 structure prepared by cubic pressing

Grain-boundary Segregation and Superior Mechanical Properties in a Multicomponent L12 Ni46.5Co24Fe8Al12.5Ti9 Superlattice Alloy

Realizing superior strength-ductility combination in dual-phase AlFeCoNiV high-entropy alloy through composition and microstructure design

Theoretical and Experimental Studies of the Structural, Phase Stability and Elastic Properties of AlCrTiFeNi Multi-Principle Element Alloy