Abstract:Shape memory properties of Poly (L-lactide)/Poly (-caprolactone) (PLLA/PCL) blends reinforced with Multiwalled Carbon Nanotubes (MWCNTs) was investigated. PLLA biodegradable shape memory implants have advantages in repair and regeneration of healing tissues. One of the drawbacks of PLLAs for biomedical applications is their brittleness. One of the most practical strategies for tuning the properties of PLLA is blending with PCL. In this research, we have studied the shape memory and mechanical behavior of MWCNT/PLLA/PCL blends nanocomposites. To avoid aggregation and bundling, MWCNTs were washed with ethanol. The samples with various contents of each component were prepared by solution casting. The microstructure, mechanical properties and shape memory effect of the blends and composites were investigated by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), polarizing optical microscopy (POM) and tensile testing. The relationship between the microstructure and shape memory properties was illuminated. Differential scanning calorimetry (DSC) of MWCNTs/PLA/PCL blends shows two glass transition temperatures (Tg) and two melting points (Tm) at positions close to the pure components revealing phase separation. The Tg and Tm of composites were increased with increasing the MWCNTs content in composites.. The XRD analysis of prepared composites shows there is a significant increase in PCL crystallization in composites by MWCNTs. The tensile tests results shows that the mechanical strength and shape recovery rate were significantly increased with increasing the MWCNTs contents in composites. The crystallinity of blend was increased with increasing the PCL in composition and in composites also the crystallinity was increased with increasing the amount of MWCNTs. The mechanical behaviour of blends and composites shows large strain after yielding and high elastic strain characteristics and exhibition good shape memory effect in which the PLLA crystal and the PCL amorphous serve as fixed phase and reversible phase, respectively. The shape recovery ratio of blend at first was decreased (15%) with increasing the amount of PCL up to 20wt%, then increased (10%) with increasing the amount of PCL until 40wt%. the shape recovery ratio of composites was increased (15%) with increasing the amount of MWCNTs up to 3wt%.

Flexible and Electro-Induced Shape Memory Poly(Lactic Acid)-based Material Constructed by Inserting a Main-Chain Liquid Crystalline and Selective Localization of Carbon Nanotubes

Mechanical and Shape Recovery Properties of Shape Memory Polymer Composite Embedded with Cup-Stacked Carbon Nanotubes

Electro-Induced Shape Memory Nanocomposite Containing Conductive Carbon Nanotubes

Flexible Material Based on Poly(Lactic Acid) and Liquid Crystal with Multishape Memory Effects

Selective Localization of Multi-Walled Carbon Nanotubes in Bi-Component Biodegradable Polyester Blend for Rapid Electroactive Shape Memory Performance

Electro-active shape memory properties of poly(ε-caprolactone)/functionalized multiwalled carbon nanotube nanocomposite.

A Novel Shape Memory Poly(Epsilon-Caprolactone) Network Via Uv-Triggered Thiol-Ene Reaction

Preparation of Polylactide/Poly(ether)urethane Blends with Excellent Electro-actuated Shape Memory Via Incorporating Carbon Black and Carbon Nanotubes Hybrids Fillers

A novel shape memory poly(ε-caprolactone) network via UV-triggered thiol-ene reaction

A Facile Method to Produce Pbs-Peg/Cnts Nanocomposites with Controllable Electro-Induced Shape Memory Effect

A spatially and temporally controlled shape memory process for electrically conductive polymer–carbon nanotube composites

Photodirected 2D-to-3d Morphing Structures of Shape Memory Polycaprolactone/w18o49 Nanowires Composite Film

Shape Memory Properties of Poly(L-Lactide) / Poly(ε-Caprolactone) Blends and Their Composites with Carbon Nanotubes

Enhanced Shape Memory Property of Polylactide/thermoplastic Poly(ether)urethane Composites Via Carbon Black Self-Networking Induced Co-Continuous Structure

Facile preparation of rapidly electro-active shape memory thermoplastic polyurethane/polylactide blends via phase morphology control and incorporation of conductive fillers

Fabrication of Thermoplastic Polyurethane/Polycaprolactone Multilayered Composites with Confined Distribution of MWCNTs for Achieving Tunable Thermo- and Electro-Responsive Shape-Memory Performances

Shape memory performances of homogeneous poly(L-lactide-co-ε-caprolactone)/polytrimethylene carbonate-grafted functionalized graphene oxide nanocomposites

Synthesis and characterization of shape memory poly (ε-caprolactone) networks with programmable and reconfigurable shape-morphing behaviors

Effect of Carbon Nanotubes on Shape memory properties of poly (L-lactide)/poly (- caprolactone) blends

Facile Fabrication of Ternary Nanocomposites with Selective Dispersion of Multi-Walled Carbon Nanotubes to Access Multi-Stimuli-responsive Shape-Memory Effects

Electro-induced Two-Way Shape Memory Thermoplastic Polyamide Elastomer/carbon Nanotubes Composites