Abstract:Induction machines (IMs) are one of the main sources of mechanical power in many industrial processes, especially squirrel cage IMs (SCIMs), due to their robustness and reliability. Their sudden stoppage due to undetected faults may cause costly production breakdowns. One of the most frequent types of faults are cage faults (bar and end ring segment breakages), especially in motors that directly drive high-inertia loads (such as fans), in motors with frequent starts and stops, and in case of poorly manufactured cage windings. A continuous monitoring of IMs is needed to reduce this risk, integrated in plant-wide condition based maintenance (CBM) systems. Diverse diagnostic techniques have been proposed in the technical literature, either data-based, detecting fault-characteristic perturbations in the data collected from the IM, and model-based, observing the differences between the data collected from the actual IM and from its digital twin model. In both cases, fast and accurate IM models are needed to develop and optimize the fault diagnosis techniques. On the one hand, the finite elements approach can provide highly accurate models, but its computational cost and processing requirements are very high to be used in on-line fault diagnostic systems. On the other hand, analytical models can be much faster, but they can be very complex in case of highly asymmetrical machines, such as IMs with multiple cage faults. In this work, a new method is proposed for the analytical modelling of IMs with asymmetrical cage windings using a tensor based approach, which greatly reduces this complexity by applying routine tensor algebra to obtain the parameters of the faulty IM model from the healthy one. This winding tensor approach is explained theoretically and validated with the diagnosis of a commercial IM with multiple cage faults.

Multiple Coupled Circuit Modelling Approach For Squirrel Cage Induction Machine Under Single-Broken-Bar Fault With Stator Winding Functions Decomposed In D-Q Rotor Reference Frame

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

An analytical model for squirrel cage induction machine with broken rotor bars derived based on the multiple coupled circuit theory and the winding function approach

Simulation and Analysis of Squirrel Cage Induction Machines under Rotor Internal Faults

Research on the Effect of Rotor Broken Bar Position on Induction Machine

Induction Motor Rotor Fault Diagnosis Method Based on Double PQ Transformation

Loss Investigation for Multiphase Induction Machine under Open-Circuit Fault Using Field–Circuit Coupling Finite Element Method

Parameters Estimation for Multiphase Induction Machine with Concentrated Windings Through Finite Element Method

Analytical Model of Induction Machines with Multiple Cage Faults Using the Winding Tensor Approach

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Steady-state Mathematical Modeling and Simulation of Inter-turn Short Circuit of Field Windings in Synchronous Machines

Semianalytical modeling of squirrel-cage induction machines with consideration of iron permeability and eddy-currents using elementary subdomain technique

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Multi-Loop Model Based Internal Fault Analysis of Variable Speed Pumped Hydro Machines

Rotor Broken Bar Fault Diagnosis for Induction Motors Based on Double PQ Transformation

Stator Current Model for Detecting Rolling Bearing Faults in Induction Motors Using Magnetic Equivalent Circuits

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Modeling of Interturn Short Fault in Interior Permanent Magnet Synchronous Motors with Multistrand Windings

Enhanced Rotor Field-Oriented Control of Multiphase Induction Machines Based on Symmetrical Components Theory