Abstract:Phosphate ions promoted Cu-SAPO-34 (P-Cu-SAPO-34) were prepared using bulk CuO particles as Cu2+ precursor by a solid-state ion exchange technique for the selective catalytic reduction of NOx with NH3 (NH3-SCR). The effects of high temperature (H-T) hydrothermal aging on the NOx removal (de-NOx) performance of Cu-SAPO-34 with and without phosphate ions were systematically investigated at atomic level. The results displayed that both Cu-SAPO-34 and P-Cu-SAPO-34 presented relatively poor NOx removal activity with a low conversion (< 30%) at 250-500°C. However, after H-T hydrothermal treatment (800°C for 10 hr at 10% H2O), these two samples showed significantly satisfied NOx elimination performance with a quite high conversion (70%-90%) at 250-500°C. Additionally, phosphate ions decoration can further enhance the catalytic performance of Cu-SAPO-34 after hydrothermal treatment (Cu-SAPO-34H). The textural properties, morphologies, structural feature, acidity, redox characteristic, and surface-active species of the fresh and hydrothermally aged samples were analyzed using various characterization methods. The systematical characterization results revealed that increases of 28% of the isolated Cu2+ active species (Cu2+-2Z, Cu (OH)+-Z) mainly from bulk CuO and 50% of the Brønsted acid sites, the high dispersion of isolated Cu2+ active component as well as the Brønsted acid sites were mainly responsible for the accepted catalytic activity of these two hydrothermally aged samples, especially for P-Cu-SAPO-34H.

Selective Catalytic Reduction of NO with NH3 over the Cu/SAPO-34 Catalysts Derived from Different Cu Precursors

Insights into the Effects of Sulfate Species on CuO/TiO2 Catalysts for NH3-SCR Reactions

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

Boosting the catalytic performance of Cu-SAPO-34 in NO removal via hydrothermal treatment

Boosting the Catalytic Performance of Cu-SAPO-34 in NOx Removal Via Hydrothermal Treatment.

Effect of Cu loading on the performance and kinetics of Cu/SAPO-34 catalysts for selective catalytic reduction with NH3

Optimization of Hybrid Crystal with SAPO-5/34 on Hydrothermal Stability for deNOx Reaction by NH3

Effect of No2 on the Selective Catalytic Reduction of No with Nh3 over Cu/Sapo-34 Molecular Sieve Catalyst

Evolution of Copper Species on Cu/SAPO-34 SCR Catalysts Upon Hydrothermal Aging

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

The Effect of Sulfate Species on the Activity of NH3-SCR over Cu/SAPO-34

In situ regeneration of sulfated Cu/SAPO-34 catalyst for the selective catalytic reduction of NOx with NH3

Durability of Cu/SAPO-34 Catalyst for NOx Reduction by Ammonia: Potassium and Sulfur Poisoning

Cu-SAPO-17: A novel catalyst for selective catalytic reduction of NO

The enhanced catalytic activity of Cu/SAPO-34 by ion exchange method for selective catalytic reduction of nitric oxide

Understanding the influence of hydrothermal treatment on NH3-SCR of NO activity over Cu -SSZ-16

The Migration of Cu Species over Cu–SAPO-34 and Its Effect on NH3oxidation at High Temperature

Migration of Cu Species in Cu/SAPO-34 During Hydrothermal Aging

Recent NH3-SCR Mechanism Research over Cu/SAPO-34 Catalyst

The role of Si coordination structures in the catalytic properties and durability of Cu-SAPO-34 as NH3-SCR catalyst for NOx reduction

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range