Abstract:A hydrogenated Zr interlayer was formed by cathodic charging and was subsequently used to facilitate the diffusion bonding of TC4 alloy. The microstructure and phase composition of the hydrogenated Zr were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermogravimetry (TG). The hydride gamma phase precipitated from the supersaturated alpha(H) phase when the alpha(H) phase was charged with 0.15 wt.% hydrogen. When the hydrogen content reached 0.3 wt.%, the gamma phase completely transformed into the epsilon phase. The effects of hydrogen on the microstructure evolution and on the mechanical properties of the diffusion bonds were investigated by XRD and by scanning electron microscopy in conjunction with energy-dispersive spectroscopy (SEM/EDS). The interdiffusion coefficient and activation energy of the Ti-hydrogenated Zr diffusion couple were calculated using the Boltzmann-Matano method and Arrhenius' law. According to the experimental and computational results, the thickness of the diffusion layer and the shear strength of the diffusion bond increased drastically with increasing hydrogen content. Specifically, when 0.3 wt.% hydrogen was added into the Zr interlayer, the thicknesses of the diffusion layers of the joints bonded at 650 degrees C and 700 degrees C increased by 5 times and 1.2 times, respectively. The activation energy at the Zr-rich end was reduced by approximately 40 kJ mol(-1), and the interdiffusion coefficient increased accordingly by two orders of magnitude. Mechanisms for the hydrogen-induced enhancement of diffusion bonding are proposed. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Low-temperature Direct Diffusion Bonding of Hydrogenated TC4 Alloy and GH3128 Superalloy

Diffusion Bonding of Hydrogenated TC4 Alloy and GH3128 Superalloy Using Composite Interlayers

Dissimilar Diffusion Bonding Behavior of Hydrogenated Ti2AlNb-based and Ti-6Al-4V Alloys

Effects of hydrogen on diffusion bonding of hydrogenated Ti6Al4V alloy containing 0.3wt% hydrogen at fast heating rate

Low-temperature direct diffusion bonding of Zr-4 alloy via hydrogenation

Effects of hydrogen on diffusion bonding of TiAl-based intermetallics using hydrogenated Ti6Al4V interlayer

Study on Diffusion Bonding of Hydrogenated TC4 Titaniurn Alloy and TiAl Alloy

Zr Hydrogenation by Cathodic Charging and Its Application in TC4 Alloy Diffusion Bonding

Effect of hydrogen on diffusion bonding of TiAl-based intermetallics and Ni-based superalloy using hydrogenated Ti6Al4V interlayer

Research on Diffusion Bonding of Hydrogenated TC4 Alloy to Al2O3 Ceramic

Low-temperature diffusion bonding of Ti6Al4V alloy via nanocrystallization and hydrogenation surface treatment

Interface microstructure evolution and bonding mechanism of low-temperature diffusion bonding of hydrogenated Zr-4 alloy

Effect Of Hydrogen Addition On The Diffusion Bonding Behavior Of Titanium Alloys

Effect of Hydrogen Addition on Diffusion Bonding Behavior of Ti-55 Alloy

Effect of Hydrogen on Diffusion Bonding of Commercially Pure Titanium and Hydrogenated Ti6Al4V Alloys

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Effect of Hydrogenation on Fatigue Crack Growth Resistance of Diffusion Bonded TC4 Titanium Alloy Laminates

A novel high entropy composite interlayer for diffusion bonding of TC4 titanium alloy to 316 L stainless steel

Vacuum diffusion bonding of TC4 titanium alloy to 316L stainless steel with AlCoCrCuNi2 high-entropy alloy interlayer

Diffusion Bonding of Hydrogenated Ti6Al4V Alloy Containing 0.15 Wt.% Hydrogen

Robust Joining of FGH98 Superalloy to DD5 Single Crystal by Modulating Interdiffusion Behavior with Ni/high-entropy Alloy Hybrid Interlayer