A Study of Reverse Osmosis-Desalinated Water Quality Adjustment with Artificially Treated Dolomite

Shasha Chen,Hong Chen,Xueming Chen,Yueping Yang

DOI: https://doi.org/10.5004/dwt.2019.23251

IF: 1.1

2019-01-01

Desalination and Water Treatment

Abstract:Here, the influences of artificially treated dolomite on the quality of osmosis-desalinated water are explored. The scanning electron microscopy and X-ray diffraction analysis patterns of dolomite were used to measure the physical and chemical characteristics of the reverse osmosis-desalinated water, and its water quality effects were assessed by measuring pH, hardness, alkalinity, Mg2+, and Ca2+ contents. The optimal calcinations condition of dolomite is at 750 degrees C for 1 h. At a retention time of 3 min, Ca2+ and Mg2+ ions in the effluent reached 18.15 and 2.26 mg/L, respectively, which are 7 and 1.5 times the concentrations observed in raw dolomite. Hardness of the effluent reached 56.59 mg/L as CaCO3 and alkalinity concentrations of the effluent reached 68.11 mg/L as CaCO3, which are about 3.5 and 3.7 times the concentrations observed in raw dolomite, respectively. The resultant pH reached 11.12. When the dolomite was acidized at 50 degrees C for 3 h, the effluent pH reduced down to 10.59, and the Mg2+ content increased to 20.42 mg/L. Proper aeration can achieve the requirement of pH in Israel criteria.