Abstract:The article presents the results of a computational and analytical study of hybrid reverse osmosis–membrane distillation (RO–MD) technologies for desalination of Caspian Sea water, suggesting the production of an additional amount of desalinated water by the MD method from RO concentrates heated to 50–80°C by the waste heat of boiler-fuel combustion products. Two options for solving the problem of the CaCO 3 and CaSO 4 scaling of membranes have been studied: with preliminary nanofiltration (NF) or sodium cationization (Na) of seawater, as an alternative to the use of an antiscalant (AS) or acid. The negative environmental effect of most plants (eutrophication of water bodies) and their low efficiency at high concentrations of desalinated water are taken into account. The Langelier saturation index (СаСО 3 ) and the degree of concentrate saturation (СаSO 4 ) were used as criteria for membrane scaling. The NF and RO processes were studied using the computer program ROSA, and the MD and Na processes were studied by computer simulation of the corresponding design models. It has been found that at a 70% permeate yield at the NF and RO stages, the possibility of calcium scale deposition on the RO and MD membranes is excluded, but it can occur on NF membranes, thereby requiring the use of antiscalants. At the same time, the additional production of permeate at the MD stage from RO concentrates reaches 40% of the amount of permeate at the RO stage and the total power consumption according to the scheme is 1.88 kWh/m 3 . Reducing the calcium hardness of sea water to 50 μeq/dm 3 by Na cationization makes it possible to refuse both the use of AS and sulfuric acid acidification with additional production of MD permeate of 27% relative to the RO permeate. The power consumption rises to 2.5 kW h/m 3 . To employ the known advantages of NF without the use of AS, a hybrid Na–NF–RO–MD scheme is proposed. It has been established that at 80% yields of NF and RO permeates, it is sufficient to reduce the hardness of sea water from 16 to 5.5 meq/dm 3 to prevent CaSO 4 scaling at all stages of treatment and to exclude CaCO 3 scaling by acidifying the softened water.

Analysis of the Proper Bicarbonate Concentration for Shipboard Seawater Reverse Osmosis Remineralization

Research on the Proper Calcium Concentration for Shipboard Seawater Reverse Osmosis Remineralization

Exploration on Increasing Concentration of Magnesium for Desalinated Water from Seawater by RO Process on Ships

Effect of different ores on water quality adjustment of seawater desalinated by reverse osmosis

A Study of Reverse Osmosis-Desalinated Water Quality Adjustment with Artificially Treated Dolomite

Remineralization of reverse osmosis desalinated seawater for washing

Investigation of efficient corrosion inhibitor during acid cleaning of Reverse Osmosis (RO) desalination plant

Study on the Superhydrophilic Modification and Enhanced Corrosion Resistance Method of Aluminum Alloy Distillation Desalination Tubes

Marine Reverse Osmosis Desalination Plant Operation-A Case Study

PILOT-SCALE STUDY ON MEMBRANE SEAWATER DESALINATION IN BOHAI RIM

Antiscalants in RO membrane scaling control

Assessment of the effectiveness of new “green” scale inhibitors used in reverse-osmosis seawater desalination

Application of Modified Cellulose-Based Antiscalant in Reverse Osmosis Membrane Scaling Control

Mitigation of mineral scaling in membrane capacitive deionization – Understanding the role of pH changes and carbonates

Scaling in reverse osmosis seawater desalination: Mechanism and prevention—A literature review

Hybrid Seawater Desalination Technology Based on Reverse Osmosis and Membrane Distillation Methods

Quasi-critical condition to balance the scaling and membrane lifespan tradeoff in hypersaline water concentration

The Influence of Salts on the Reverse Osmosis Performance Treating Simulated Boron-Containing Low Level Radioactive Wastewater

The influence of antiscalants on biofouling of RO membranes in seawater desalination

Biomineralization eliminating marine organic colloids (MOCs) during seawater desalination: Mechanism and efficiency

Fouling Characteristics and Fouling Control of Reverse Osmosis Membranes for Desalination of Dyeing Wastewater with High Chemical Oxygen Demand