Improvement of cellulose acetate forward osmosis membrane performance using zinc oxide nanoparticles
Mostafa El-Noss,Heba Isawi,Hossam A. Shawky,M.A. Gomaa,M.S.A. Abdel-Mottaleb
DOI: https://doi.org/10.5004/dwt.2020.25677
IF: 1.1
2020-01-01
Desalination and Water Treatment
Abstract:With the continual progress in developing the forward osmosis (FO) membrane, in both industry and academia, it is prospected to remain the best alternative technique for the production of freshwater. The current paper focuses on the preparation and characterization of FO membranes and ZnO nanoparticles (ZnO NPs) that can be used for membrane modification to enhance its performance. FO membranes are fabricated in our labs from the cellulose acetate (CA) polymer by phase inversion methods. These membranes are easy to prepare, stable against bacterial attack, chemical, and mechanical changes, as well as showing excellent performance and superior economics. The optimum conditions for preparing forward osmosis cellulose acetate (FO-CA) membranes are; 7 wt.% CA, 92.75 wt.% acetone, and 0.25 wt.% ZnO NPs per unit percentage of CA in aqueous solution. A new approach for the modification of CA membranes using the synthesized ZnO NPs was shown to enhance the performance of membranes for forward osmosis water desalination process. We study the effect of polymer concentration, membrane thickness, and membrane modification by ZnO NPs on membrane performance. The fabricated membranes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), attenuated total reflectance–Fourier transform infrared spectroscopy, and the mechanical properties were studied in order to expose the best membrane for water desalination and also the synthesized ZnO NPs were characterized by XRD and SEM. The performance of the CA/ZnO NPs membranes were examined using parameters, such as contact angle, surface area and pore size, water flux (Jw), and salt rejection (R%). Compared with the pure CA membrane, the CA membrane modified with ZnO NPs was more hydrophilic, with an improved water contact angle (~47.6 ± 2°) over the pure CA membrane (~63.85 ± 2°) and it showed improving in water flux (26.57 L h-1 m-2) over the pure CA membrane (19.42 L h-1 m-2), also it showed salt rejection 99.5% of Na+, 100% of Cl–, and 99.6% of Mg2+. The water flux increased in the case of CA membrane modified with ZnO NPs is due to increasing in surface area and total pore volume than the pure CA membrane by 23% and 20%, respectively. This demonstrates that the CA membrane modified with ZnO NPs can significantly improve the membrane performances and was suitable to enhance the selectivity, and water flux of the membranes for water desalination.
engineering, chemical,water resources