Abstract:Due to the excellent mechanical, chemical, and electrical properties of third-generation semiconductor silicon carbide (SiC), pressure sensors utilizing this material might be able to operate in extreme environments with temperatures exceeding 300 °C. However, the significant output drift at elevated temperatures challenges the precision and stability of measurements. Real-time in situ temperature monitoring of the pressure sensor chip is highly important for the accurate compensation of the pressure sensor. In this study, we fabricate platinum (Pt) thin-film resistance temperature detectors (RTDs) on a SiC substrate by incorporating aluminum oxide (Al2O3) as the transition layer and utilizing aluminum nitride (AlN) grooves for alignment through microfabrication techniques. The composite layers strongly adhere to the substrate at temperatures reaching 950 °C, and the interface of the Al2O3/Pt bilayer remains stable at elevated temperatures of approximately 950 °C. This stability contributes to the excellent high-temperature electrical performance of the Pt RTD, enabling it to endure temperatures exceeding 850 °C with good linearity. These characteristics establish a basis for the future integration of Pt RTD in SiC pressure sensors. Furthermore, tests and analyses are conducted on the interfacial diffusion, surface morphological, microstructural, and electrical properties of the Pt films at various annealing temperatures. It can be inferred that the tensile stress and self-diffusion of Pt films lead to the formation of hillocks, ultimately reducing the electrical performance of the Pt thin-film RTD. To increase the upper temperature threshold, steps should be taken to prevent the agglomeration of Pt films.

Thermoresistance of P‐type 4h–sic Integrated MEMS Devices for High‐Temperature Sensing

Temperature Sensing Elements for Harsh Environments in a 4H-SiC CMOS Technology

Unintentionally Doped Epitaxial 3C-SiC(111) Nanothin Film as Material for Highly Sensitive Thermal Sensors at High Temperatures

Thermoresistive properties of p-type 3C–SiC nanoscale thin films for high-temperature MEMS thermal-based sensors

An On‐Chip SiC MEMS Device with Integrated Heating, Sensing, and Microfluidic Cooling Systems

A Novel Vanadium Dioxide-Based Dual-Heater Microfluidic Thermal Flow Sensor with Record High Sensitivity

Exploring the nonlinear piezoresistive effect of 4H-SiC and developing MEMS pressure sensors for extreme environments

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Nonlinear piezoresistive effect of 4H–SiC for applications of high temperature pressure sensors

High Performance Bidirectional Thermal Gas Flow Sensor of (100) Silicon Single-Sided Fabrication by 45-Tilted Dicing

Performance Enhance of CMOS-MEMS Thermoelectric Infrared Sensor by Using Sensing Material and Structure Design

Integrated Lateral SBD Temperature Sensor of a 4H-Sic VDMOS for Real-Time Temperature Monitoring

Pt thin-film resistance thermo detectors with stable interfaces for potential integration in SiC high-temperature pressure sensors

Characterization of the Piezoresistance in Highly Doped P-Type 3C-Sic at Cryogenic Temperatures

Single (111)-Wafer Single-Side Microfabrication of Suspended p + Si/n + Si Thermopile for Tiny-Size and High-Sensitivity Thermal Gas Flow Sensors

Design Criteria of High-Temperature Integrated Circuits Using Standard SOI CMOS Process up to 300°C

Piezoresistive temperature sensors fabricated by a surface micromachining CMOS MEMS process

Cryogenic and high temperature performance of 4H-SiC power MOSFETs

Characterization and Modeling of Self-Heating in Nanometer Bulk-CMOS at Cryogenic Temperatures

Fabrication of 4H-SiC piezoresistive pressure sensor for high temperature using an integrated femtosecond laser-assisted plasma etching method

MEMS Flow Sensors Based on Self-Heated aGe-Thermistors in a Wheatstone Bridge