Abstract:The internal layout of the converter chassis in metro traction system is compact, and the electromagnetic couplings among power circuit, control circuit, and converter chassis are complicated. The electromagnetic interference (EMI) generated by the high-speed switching of power devices couples to the control circuit through the converter chassis, which may affect the safety and reliability of the system. In order to evaluate EMI performance at low-voltage power ports effectively, this article studies noise coupling mechanism on how common-mode (CM) EMI from the power circuit propagates to the low-voltage power cables through converter chassis. A multiterminal impedance network model of the converter chassis with an impedance matrix is built, and the parameters in the impedance matrix are extracted. The high-frequency models of coupling impedances between the converter chassis and different components are built, and the parameters of coupling impedances in the models are extracted. Based on these works, an estimation model of CM EMI coupling from power circuit to low-voltage power port through converter chassis is proposed. With the proposed model, the CM EMI at low-voltage power port is simulated. Different grounding schemes of the converter chassis are evaluated, and the optimal grounding position on the converter chassis is found. The simulated results are verified by experiment.

A New Approach for Improving Stability of Active CM EMI Filters for AC/DC Power Converters

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

A Systematic Approach Via IIR Filters for Enhancing the Robustness of LCL-Type Shunt Active Power Filters to Grid Impedance

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

High-frequency modeling based EMC performance improvement of power supplies in inverters

Modified Modeling And System Stabilization Of Shunt Active Power Filter Compensating Loads With F Capacitance

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

Improved Modeling, Stability Analysis and Resonance Suppression of APF System

Stability Analysis of MMC Considering Internal Dynamics Based on Equivalent Impedance Model

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

An Extended Impedance Model for Power Electronics Converters Retaining Explicit Synchronization Dynamics

Integration of Both EMI Filter and Boost Inductor for 1-Kw PFC Converter

Impedance-based AC/DC Terminal Modeling and Analysis of MMC-BTB system

Analysis of the Instability of EMI Filters in Switched Mode Power Supplies

Impedance-Based AC/DC Terminal Modeling and Analysis of the MMC-BTB System

Stability Criteria for Constant Power Loads with Multistage $LC$ Filters

Impedance Modeling and Analysis of Three-Phase Voltage-Source Converters Viewing from DC Side

PFC converter with novel integration of both EMI filter and Boost inductors

Impedance Modeling and Small Signal Stability Analysis of the Cascaded AC/DC Converter

Dynamic interaction analysis among different control loops and stability enhancement strategy for MMC-HVDC systems

Modeling and Stability Analysis of the Cascaded Dual Active Bridge Converter System with Considerations of the Controller Parameters