Abstract:It has been proved that bulk single crystals of a halide perovskite behave much better than its polycrystalline counterparts in multiple application scenarios. Thus, the growth of large-sized and high-quality single crystals is significant to guarantee their ultimate device performances. Here, based on our recently invented settled temperature and controlled antisolvent diffusion system, improvements achieved in this work include the following: (1) We modified the growth system to optimize the control over both mass and heat transport to alleviate defect formation. State-of-the-art-quality MAPbBr3 crystals were grown, and from the bulk crystals, differently oriented crystalline wafers were fabricated with the full width at half-maximum of X-ray rocking curves of 40–86 arcsec. (2) The optical band gaps revealed no anisotropy on differently oriented wafers, whereas the refractive index and extinction coefficient exhibited obvious anisotropy. (3) Angle-resolved polarized Raman spectra demonstrate distinct in-plane anisotropy on (100) and (110) wafers but not on the (111) wafer. The equilibrium MA+ orientations are deduced to adopt the <111> direction with the antiparallel MA+ orientation between adjacent domains. (4) Radiation detectors fabricated on differently oriented wafers proved photoresponse anisotropy to both visible and X-ray radiation, following a general order of (100) > (110) > (111). Because anisotropy is an inevitable issue for various applications employing crystalline materials, this study, based on the clarification of the debatable intrinsic dipole configuration in the pseudocubic crystal lattice, will provide quantitative information on physicochemical property anisotropy and subsequently facilitate optimization of device performance referring to crystal orientations of halide perovskite crystals.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14582?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14582</a>.Density and ultraviolet photoelectron spectroscopy (UPS) measurements of an MAPbBr3 crystal; PL lifetime measurements and Raman spectra of (100), (110), and (111) oriented MAPbBr3 single-crystal wafers; angular resolved polarization Raman spectroscopy and polar plots of the vibration intensity of differently oriented MAPbBr3 wafers; light excitation measurement setup and current–voltage (I–V) curves for (100), (110), and (111) wafers; photocurrent and detectivity (D*) and on–off switching of photocurrents on the (100), (110), and (111) wafer devices; comparison of bulk single-crystal growth of organic–inorganic halide perovskites; comparison of visible light and X-ray radiation detections based on organic–inorganic halide perovskite bulk single crystals (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14582/suppl_file/am0c14582_si_001.pdf">PDF</a>)Seed crystals with poor quality turning into polycrystals during the recovery period (Video S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14582/suppl_file/am0c14582_si_002.mp4">MP4</a>)Video showing fluctuations of temperature and antisolvent content producing a large number of small crystals at the bottom of the crystallizer (Video S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14582/suppl_file/am0c14582_si_003.mp4">MP4</a>)Actual situation of crystal growth (Video S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14582/suppl_file/am0c14582_si_004.mp4">MP4</a>)This article has not yet been cited by other publications.

Enhanced Seebeck Effect Of A Mapbbr(3) Single Crystal By An Organic And A Metal Modified Layer

Homologous Bromides Passivation of CH 3NH 3pbbr 3 Single Crystals for Photodetectors with Improved Properties

Unveiling heavy heterovalent doping-modulated microstructure and thermoelectric performance in bulk hybrid perovskite single crystals

Discrete interfacial effects of organic lead halide perovskite coating on magnetic underlayer: MAPbBr 3 /FePd heterostructure

Bismuth Doping-Induced Stable Seebeck Effect Based On Mapbi(3) Polycrystalline Thin Films

Confined Growth of High-quality Single-Crystal MAPbBr3 by Inverse Temperature Crystallization for Photovoltaic Applications

Thickness-Controlled Wafer-Scale Single-Crystalline MAPbBr 3 Films Epitaxially Grown on CsPbBr 3 Substrates by the Droplet-Evaporated Crystallization Method

The crystal anisotropy effect of MAPbI3 perovskite on optoelectronic devices

Zn-alloyed MAPbBr 3 crystals with improved thermoelectric and photocatalytic properties

NiSe layer enhanced the efficiency of hole-conductor-free MAPbI3 perovskite solar cells

Engineering atomic-level crystal lattice and electronic band structure for extraordinarily high average thermoelectric figure of merit in n-type PbSe

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

Crystallization and Defect Chemistry Dual Engineering for MAPbI 3 Perovskite Solar Cells with Efficiency Approaching 22%

Anisotropic Performance of High-Quality MAPbBr 3 Single-Crystal Wafers

Multifunctional Thiophene Cascading SnO2/Perovskite Interfaces for Efficient and Stable MAPbI3 Photovoltaics

Homologous bromides passivation of CH3NH3PbBr3 single crystals for photodetectors with improved properties

Strain-Manipulated Photovoltaic and Photoelectric Effects of the MAPbBr 3 Single Crystal

Strengthened Interficial Adhesive Fracture Energy by Young's Modulus Matching Degree Strategy in Carbon‐Based HTM Free MAPbI3 Perovskite Solar Cell with Enhanced Mechanical Compatibility

Mitigating Surface Deficiencies of Perovskite Single Crystals Enables Efficient Solar Cells with Enhanced Moisture and Reverse‐Bias Stability

An Amorphous Precursor Route To The Conformable Oriented Crystallization Of Ch3nh3pbbr3 In Mesoporous Scaffolds: Toward Efficient And Thermally Stable Carbon-Based Perovskite Solar Cells

Simultaneously Enhancing Efficiency and Stability of Perovskite Solar Cells Through Crystal Cross‐Linking Using Fluorophenylboronic Acid