Abstract:The power conversion efficiency of perovskite solar cells (PSCs) has increased dramatically over the past decade, reaching more than 26%. With such high efficiency, PSCs could become one of the most important commercial alternatives to silicon‐based solar cells in the near future. However, the inconsistency of PSC operation over time is the key issue restricting its commercial application. One of the most common means of improving the overall stability of PSCs is the introduction of additives with specific functional groups to extend their useful life. Here we compare the performance and stability of MAPbI3‐based PSCs with additions of either benzoic acid (0F‐B), fluorinated benzoic acids (4‐fluorobenzoic acid (1F‐B), or 2,3,4,5,6‐pentafluorobenzoic acid (5F‐B)) in the perovskite active layer. These additives, upon interacting with the perovskite precursors, chelate onto lead ions and form hydrogen bond with methyl ammonium ions. These combined interactions result in an increased activation energy for nucleation of perovskite crystals, thereby, increased crystal size, reduced defect formation, improved electronic properties, as well as reduced ion migration. As a result, PSCs added with largest fluorine substitution of 5F‐B achieve the highest efficiency of 20.50% with a narrow PCE distribution compared to that of PSC devices added with 1F‐B (19.25%), 0F‐B (18.80%) and pristine devices (18.53%). Notably, 5F‐B added PSCs retain 80% of their initial PCE after ∽100 days humidity test (at 25 °C and 50 RH%), 30 days thermal stability test (at 85 °C in nitrogen environment), and 12 days light illumination test (continuous simulated solar radiation). Therefore, 5F‐B added PSCs synergistically achieve the highest performance and remain very stable under constant heat, humidity, or light illumination conditions for sustained energy‐harvesting applications in the future. TOC: This study focuses on the impacts of benzoic acid and its fluorinated derivatives functioning as effective passivation additives for methyl ammonium lead iodide (MAPbI3) perovskite solar cells. These additives synergistically passivate the perovskite layer, resulting in improved crystallinity and surface morphology, leading to an increased efficiency. Moreover, this approach enhances the long‐term stability of the architected solar cells, rendering them more suitable for future commercial applications. This article is protected by copyright. All rights reserved.

Simultaneously Enhancing Efficiency and Stability of Perovskite Solar Cells Through Crystal Cross‐Linking Using Fluorophenylboronic Acid

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Fluorinated Oligomer Wrapped Perovskite Crystals for Inverted MAPbI 3 Solar Cells with 21% Efficiency and Enhanced Stability

Interface and Grain Boundary Passivation by PEA-SCN Double Ions via One-Step Crystal Engineering for All Air-Processed, Stable Perovskite Solar Cells

Crosslinkable and Chelatable Organic Ligand Enables Interfaces and Grains Collaborative Passivation for Efficient and Stable Perovskite Solar Cells

Cross-linkable molecule in spatial dimension boosting water-stable and high-efficiency perovskite solar cells

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Improved Performance and Stability of Perovskite Solar Cells by Crystal Crosslinking with Alkylphosphonic Acid Ω-Ammonium Chlorides

Covalently Connecting Crystal Grains with Polyvinylammonium Carbochain Backbone To Suppress Grain Boundaries for Long-Term Stable Perovskite Solar Cells

Fine optimized cation immobilization strategy for enhancing stability and efficiency of perovskite solar cells

Realizing Stable Perovskite Solar Cells with Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation

Enhancing the Stability and Efficiency of Inverted Perovskite Solar Cells with a Mixed Ammonium Ligands Passivation Strategy

Stiffening the Pb-X Framework through a π-Conjugated Small-Molecule Cross-Linker for High-Performance Inorganic CsPbI 2 Br Perovskite Solar Cells

Synergistic Enhancement of Stability and Performance for Perovskite Solar Cells Using Fluorinated Benzoic Acids as Additives

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

Simultaneous Interface Amelioration and Energy Level Modulation Using In Situ Polymerized Molecules for Efficient and Stable Perovskite Solar Cells

Collaborative strengthening by multi-functional molecule 3-thiophenboric acid for efficient and stable planar perovskite solar cells

PbI6 Octahedra Stabilization Strategy Based on π‐π Stacking Small Molecule Toward Highly Efficient and Stable Perovskite Solar Cells

Thermal Stability and Performance Enhancement of Perovskite Solar Cells Through Oxalic Acid-Induced Perovskite Formation

Bifunctional Lewis Base‐Assisted Fabrication of High‐Quality CsPbIBr2 Perovskite for Efficient and Stable Solar Cells

Conjugated Phosphonic Acids Enable Robust Hole Transport Layers for Efficient and Intrinsically Stable Perovskite Solar Cells