Abstract:The influences of Ni substitution for Fe/Co on the thermal, mechanical and magnetic properties of (Co1-x-yNixFey)(68)B21.9Si5.1Nb5(x = 0, y = 0.3; x = 0.1, y = 0.2; x = 0.2, y = 0.1; x = 0.3, y = 0; x = 0.4, y = 0; x = 0.5, y = 0) metallic glasses are investigated. A new (Co(0.5)Nf(0.5))(68)B21.9Si5.1Nb5 bulk metallic glass (BMG) with a high strength of 4070 MPa and a large plasticity of 3.8% is successfully prepared. The higher Poisson's ratio (nu) increases the effective free volume in the alloy, which promotes plastic flow before fracture. Besides, the lower glass transition temperature indicates lower shear flow barrier, and the narrower supercooled liquid region can easily improve the structural heterogeneity, both of which enhance the plastic strain of the BMG. Furthermore, the effects of the addition of elements that have large nu (Ni) or positive mixing enthalpy with major elements (Cu), as well as their co-addition, on the mechanical properties of CoFeBSiNb BMG system are compared. The substitution of Fe/Co with Ni leads to the decrease of both saturation magnetization and coercivity of the metallic glasses, and the material even changes from ferromagnetic to paramagnetic after Fe is completely replaced by Ni because of the low atomic magnetic moment of Ni. This work not only confirms the universal critical Poisson's ratio for plasticity in Co-based BMG5, but also provides design guidelines for Co-based BMG5 with large plasticity. (C) 2019 Elsevier B.V. All rights reserved.

Effects of Ni and Si Additions on Mechanical Properties and Serrated Flow Behavior in FeMoPCB Bulk Metallic Glasses

Intrinsic Versus Extrinsic Effects on Serrated Flow of Bulk Metallic Glasses

A Plastic FeNi-based Bulk Metallic Glass and Its Deformation Behavior

Effects of Ni Substitution for Fe/Co on Mechanical and Magnetic Properties of Co-based Bulk Metallic Glasses

Effects of Cu Additions on Mechanical and Soft-Magnetic Properties of CoFeBSiNb Bulk Metallic Glasses

Effects of Mo on the Glass Forming Ability and Properties of Fe-B-C-P-Si-Mo Bulk Metallic Glasses

Improved glass forming ability and soft magnetic properties by minor Mo alloying in Fe–P–C–B–Si bulk metallic glasses

Correlation Between Deformation Behavior and Atomic-Scale Heterogeneity in Fe-based Bulk Metallic Glasses

Ductile Co-based Bulk Metallic Glass with Superhigh Strength and Excellent Soft Magnetic Properties Induced by Modulation of Structural Heterogeneity

Effects of Mo Additions on the Glass-Forming Ability and Magnetic Properties of Bulk Amorphous Fe-C-Si-B-P-Mo Alloys

Ductile FeNi-based bulk metallic glasses with high strength and excellent soft magnetic properties

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Unusual Gradient Stress Induced Superior Room-Temperature Plasticity in Brittle Ferromagnetic Bulk Metallic Glass

Serration Behaviours in Metallic Glasses with Different Plasticity

Design Optimization and Mechanical Properties of SiC Particle Reinforced Ti-Based Metallic Glass Matrix Composite

A Novel FeNi-based Bulk Metallic Glass with High Notch Toughness over 70 MPa M1/2 Combined with Excellent Soft Magnetic Properties

Enhancement of plasticity for FeCoBSiNb bulk metallic glass with superhigh strength through cryogenic thermal cycling

Densification and heterogeneity enhancement of Fe-based metallic glass under local plastic flow

The Effect of Co Addition on Glassy Forming Ability and Soft Magnetic Properties of Fe-Si-B-P Bulk Metallic Glass

Effect of Si/B ratio on glass-forming ability, phase transitions and magnetic properties in (Fe40Ni40SixByCu1)0.97Nb0.03 alloys