Abstract:A proof-of-concept gas sensor based on a miniaturized and integrated fiber-optic photoacoustic detection module was introduced and demonstrated for the purpose of developing a custom tuning-fork (TF)-enhanced photoacoustic gas sensor. Instead of piezoelectric quartz tuning fork (QTF) in conventional quartz-enhanced photoacoustic spectroscopy (QEPAS), a low-cost custom aluminum alloy TF fabricated by mechanical processing was employed as a photoacoustic transducer and the vibration of TF was measured by fiber-optic Fabry-Pérot (FP) interferometer (FPI). The mechanical processing-based TF design scheme greatly increases the flexibility of the TF design with respect to the complex and expensive manufacture process of custom QTFs, and thus it can be better exploited to detect gases with slow vibrational-translational (V-T) relaxation rates and combine with light sources with poor beam quality. The resonance frequency and the quality factor of the designed custom TF at atmospheric pressure were experimentally determined to be 7.3 kHz and 4733, respectively. Dual-prong differential measurement method was proposed to double the photoacoustic signal and suppress the external same-direction noise. After detailed optimizing and investigating for the operating parameters by measuring H2O, the feasibility of the developed sensor for gas detection was demonstrated with a H2O minimum detection limit (MDL) of 1.2 ppm, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 3.8 × 10-8 cm-1 W/Hz1/2, which are better than the QTF-based photoacoustic sensors. The proposed gas sensing approach combined the advantages of QEPAS and fiber-optic sensing, which can greatly expand the application domains of PAS-based gas sensors.

A Miniature Fiber-Optic Photoacoustic Probe Coated with MoS2-PDMS for Water Level and Oil-Water Interface Detection*

Measurement of Water Content in Heavy Oil with Cavity Resonator

Whispering-gallery Optical Microprobe for Photoacoustic Imaging

High-consistent optical fiber photoacoustic generator with carbon nanoparticles-PDMS composite

Fiber-Tip Gas Transducer Based on All-Optical Photoacoustic Spectroscopy

A Miniature Multi-Functional Photoacoustic Probe.

Transparent microfiber Fabry-Perot ultrasound sensor with needle-shaped focus for multiscale photoacoustic imaging

A normalization theorem for set theory

High-Sensitivity Low-Frequency Fabry-Perot Ultrasonic Hydrophone With Chitosan Diaphragm

Encapsulated Microbubble Fiber-Tip Fabry-Perot Cavity With Tunable Bandwidth for Sensitive Acoustic Detection

Fiber-Optic Photoacoustic Gas Sensor with Multiplexed Fabry-Pérot Interferometric Cantilevers

A transparent broadband ultrasonic detector based on an optical micro-ring resonator for photoacoustic microscopy

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

Miniaturized anti-interference cantilever-enhanced fiber-optic photoacoustic methane sensor

Fiber-Optic Photoacoustic Gas Microsensor Dual Enhanced by Helmholtz Resonator and Interferometric Cantilever

Photothermally Tunable Fabry-Pérot Fiber Interferometer for Photoacoustic Mesoscopy.

Miniaturized and highly-sensitive fiber-optic photoacoustic gas sensor based on an integrated tuning fork by mechanical processing with dual-prong differential measurement

Photoacoustic Mesoscopy with Lower Cost: Using Photothermal Tunable Fabry-Perot Interferometric Ultrasound Sensor

Miniature non-contact photoacoustic probe based on fiber-optic photoacoustic remote sensing microscopy

Effect of royal jelly on mitotic activity of lymphocytes.

An Encapsulated Optical Microsphere Sensor for Ultrasound Detection and Photoacoustic Imaging