Abstract:Fiber optic Fabry-Perot interferometer is inherently suitable as the ultrasonic transducer for photoacoustic tomography due to its high sensitivity, broad bandwidth and small footprint. Interrogated by a narrow linewidth continuous wave laser, the sensor’s output power is modulated by the incident ultrasound. During the imaging process, the sensor’s sensitivity is maximized by locking the laser to a spectral point where the sensor’s reflectivity changes most rapidly with wavelength. Traditionally, one needs a fast tunable laser to scan the reflection spectrum of the sensor and subsequently lock the laser frequency to the proper spectral point using a feedback loop. The requirement of a wavelength-tunable, low-noise interrogation laser significantly raises system cost and inhibits parallel detection. In this paper, we present a fiber optic Fabry-Perot acoustic sensor whose reflection spectrum can be swiftly and robustly tuned using an economical visible diode laser. By controlling the power of the illumination laser, the temperature of the sensor cavity can be finely adjusted which leads to altered cavity length and shifted spectrum. With this technique, we are able to tune the spectrum by more than 10 nm with a precision less than 0.1 nm. The sensor was characterized to exhibit a flat frequency response up to 20 MHz and a noise-equivalent pressure below 200 Pa. This sensor can be batch-fabricated and its low cost and easy implementation make parallel detection feasible and affordable, potentially benefiting fast image acquisition. The performance of the sensor was demonstrated in multiple phantom and in vivo imaging experiments.

Photoacoustic Mesoscopy with Lower Cost: Using Photothermal Tunable Fabry-Perot Interferometric Ultrasound Sensor

Photothermally Tunable Fabry-Pérot Fiber Interferometer for Photoacoustic Mesoscopy.

Tunable high-finesse fiber optic Fabry-Perot interferometer for photoacoustic tomography (Conference Presentation)

Transparent microfiber Fabry-Perot ultrasound sensor with needle-shaped focus for multiscale photoacoustic imaging

Experimental design and numerical investigation of a photoacoustic sensor for a low-power, continuous-wave, laser-based frequency-domain photoacoustic microscopy.

Whispering-gallery Optical Microprobe for Photoacoustic Imaging

Photoacoustic Mouse Brain Imaging Using an Optical Fabry-Pérot Interferometric Ultrasound Sensor

Hybrid optical parametrically-oscillating emitter at 1930 nm for volumetric photoacoustic imaging of water content

Miniaturized all-optical photoacoustic microscopy based on microelectromechanical systems mirror scanning.

Photoacoustic Properties of Metal-Insulator-metal Nanostructures

A cost-efficient frequency-domain photoacoustic imaging system

Photoacoustic Probe Using A Microring Resonator Ultrasonic Sensor for Endoscopic Applications

A Cost-Efficient Multiwavelength LED-Based System for Quantitative Photoacoustic Measurements

In Vivo Reflection-Mode Photoacoustic Microscopy Enhanced by Plasmonic Sensing with an Acoustic Cavity

A Miniature Multi-Functional Photoacoustic Probe.

Sensitivity Characteristics of Microfiber Fabry-Perot Interferometric Photoacoustic Sensors

Ultrathin, high-speed, all-optical photoacoustic endomicroscopy probe for guiding minimally invasive surgery

Miniature Probe for Optomechanical Focus-Adjustable Optical-Resolution Photoacoustic Endoscopy

Broadband transparent ultrasound transducer with polymethyl methacrylate as matching layer for in vivo photoacoustic microscopy

Optical ultrasound sensors for photoacoustic imaging: a review

Photoacoustic raster scan imaging using an optomechanical ultrasound sensor in silicon photonics