Abstract:A proof-of-concept gas sensor based on a miniaturized and integrated fiber-optic photoacoustic detection module was introduced and demonstrated for the purpose of developing a custom tuning-fork (TF)-enhanced photoacoustic gas sensor. Instead of piezoelectric quartz tuning fork (QTF) in conventional quartz-enhanced photoacoustic spectroscopy (QEPAS), a low-cost custom aluminum alloy TF fabricated by mechanical processing was employed as a photoacoustic transducer and the vibration of TF was measured by fiber-optic Fabry-Pérot (FP) interferometer (FPI). The mechanical processing-based TF design scheme greatly increases the flexibility of the TF design with respect to the complex and expensive manufacture process of custom QTFs, and thus it can be better exploited to detect gases with slow vibrational-translational (V-T) relaxation rates and combine with light sources with poor beam quality. The resonance frequency and the quality factor of the designed custom TF at atmospheric pressure were experimentally determined to be 7.3 kHz and 4733, respectively. Dual-prong differential measurement method was proposed to double the photoacoustic signal and suppress the external same-direction noise. After detailed optimizing and investigating for the operating parameters by measuring H2O, the feasibility of the developed sensor for gas detection was demonstrated with a H2O minimum detection limit (MDL) of 1.2 ppm, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 3.8 × 10-8 cm-1 W/Hz1/2, which are better than the QTF-based photoacoustic sensors. The proposed gas sensing approach combined the advantages of QEPAS and fiber-optic sensing, which can greatly expand the application domains of PAS-based gas sensors.

Fiber-Optic Photoacoustic Gas Microsensor Dual Enhanced by Helmholtz Resonator and Interferometric Cantilever

Fiber-Optic Photoacoustic Gas Sensor with Multiplexed Fabry-Pérot Interferometric Cantilevers

Ultra-high sensitive multi-pass absorption enhanced fiber-optic photoacoustic gas analyzer

Fiber-Tip Gas Transducer Based on All-Optical Photoacoustic Spectroscopy

High-sensitivity miniature dual-resonance photoacoustic sensor based on silicon cantilever beam for trace gas sensing

Miniaturized and highly-sensitive fiber-optic photoacoustic gas sensor based on an integrated tuning fork by mechanical processing with dual-prong differential measurement

Fiber-optic photoacoustic gas sensing: a review

Integrated near-infrared fiber-optic photoacoustic sensing demodulator for ultra-high sensitivity gas detection

Fiber-Optic Photoacoustic CO Sensor for Gas Insulation Equipment Monitoring Based on Cantilever Differential Lock-In Amplification and Optical Excitation Enhancement

Compact optical fiber photoacoustic gas sensor with integrated multi-pass cell

Mid-Infrared Hollow-Core Fiber Based Flexible Longitudinal Photoacoustic Resonator for Photoacoustic Spectroscopy Gas Sensing

High sensitivity miniaturized multi-pass absorption enhanced differential Helmholtz photoacoustic gas sensor

Highly Sensitive Photoacoustic Gas Sensor with Micro-Embedded Acoustic Resonator for Gas Leakage Detection.

Doubly resonant photoacoustic spectroscopy: ultra-high sensitivity meets ultra-wide dynamic range

Cantilever-enhanced dual-comb photoacoustic spectroscopy

Miniaturized anti-interference cantilever-enhanced fiber-optic photoacoustic methane sensor

High-Sensitivity Silicon Cantilever-Enhanced Photoacoustic Spectroscopy Analyzer with Low Gas Consumption

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

Double Resonant Cavity Enhanced Photoacoustic Gas Sensor for Acetylene Detection

Mid-infrared photoacoustic gas monitoring driven by a gas-filled hollow-core fiber laser

Photothermally Tunable Fabry-Pérot Fiber Interferometer for Photoacoustic Mesoscopy.