Effects of AlH 3 particle size and loading on the combustion and agglomeration of solid propellants
Lu Liu,Zhan Wen,Wen Ao,Dongliang Gou,Peijin Liu,Larry K.B. Li,Guoqiang He
DOI: https://doi.org/10.1016/j.combustflame.2024.113327
IF: 4.4
2024-01-29
Combustion and Flame
Abstract:Owing to its hydrogen storage capacity, aluminum hydride (AlH 3 ) has been proposed as a potential fuel additive in solid rocket propellants to achieve a higher specific impulse and cooler combustion. In this experimental investigation, we examine the effects of AlH 3 loading and particle size on the thermal decomposition, ignition, agglomeration and combustion of high-energy solid propellants at pressures up to 9.1 MPa. We use a variety of diagnostics, including thermogravimetry, differential scanning calorimetry, energy dispersive X-ray spectroscopy, scanning electron microscopy and so on. The results show that adding AlH 3 can enhance the thermal decomposition of the propellants. As the loading of fine-grained AlH 3 increases, the combustion intensity drops, but the ignition delay time drops as well (by 60 %). When the AlH 3 particle size increases, the ignition delay time rises, but it remains shorter than that of a baseline propellant containing Al instead of AlH 3 . Although AlH 3 is found to lower the gas-phase flame temperature and temperature gradient, it enhances the burning rate and lowers the pressure exponent from 0.58 to 0.50. Fine-grained AlH 3 is also found to shrink the near-burning surface agglomerates and condensed combustion products, increasing the combustion efficiency from 81.9 % to 94.7 %. However, coarse-grained AlH 3 shows the opposite effect, decreasing the combustion efficiency to 63.3 %. Overall, this study sheds new light on the influence of AlH 3 addition on high-energy propellants, facilitating the application of this promising fuel additive in solid rocket motors.
energy & fuels,engineering, chemical, mechanical,thermodynamics, multidisciplinary