Abstract:Aluminum powder can increase the specific impulse and improve the combustion performance of a solid propellant; however, agglomeration can result in the loss of two-phase flow, a decrease in specific impulse of the propellant, and an increase in the thermal protection pressure of the motor structure. This study employs digital inline holography, which offers the advantage of non-contact three-dimensional measurements, to investigate the agglomeration particle size near the burning surface. This study aims to quantitatively analyze these particle size data to determine the effects of pressure, ammonium perchlorate particle size, coarse and fine ammonium perchlorate content ratio, and aluminum particle size on the agglomeration particle size distribution. The experimental results indicate that increasing the pressure from 0.1 MPa to 0.8 MPa reduces the average particle diameter of agglomeration by at least 9.6%, results in a more concentrated agglomeration particle size distribution, and decreases the volume and number proportion of agglomeration by approximately 7% and 17%, respectively. Furthermore, when the particle size of ammonium perchlorate decreases from 250 kmi. to 90 um, the agglomeration particle size distribution becomes more concentrated, the average diameter of agglomeration decreases by at least 37.4%, and the number and volume proportion of agglomeration decrease by approximately 13% and 44%, respectively. The ratio of coarse and fine ammonium perchlorate content has a nonlinear effect on agglomeration. When this ratio is 0.6, the average agglomerate diameter decreases by at least 16%, the agglomeration particle size distribution is more concentrated than that the ratio is 0.39 and 1.29, and the agglomeration number and volume fraction decrease by more than 6% and 32%, respectively. Moreover, decreasing the initial aluminum particle size from 30 kmi. to 15 um reduces the average agglomeration particle diameter by more than 21.6%, results in a more concentrated agglomeration particle size distribution, however, increases the number and volume proportion of agglomeration by approximately 17% and 8%, respectively. The conclusions of this study are expected to be significantly helpful in optimizing propellant formulation, reducing the particle size of aluminum agglomeration, and improving the combustion performance of propellants.

Aluminum particle agglomeration characteristics and suppression method during the combustion of aluminum-based solid propellants: A review

Aluminum Particle Agglomeration Characteristics and Suppression Method During the Combustion of Aluminum‐based Solid Propellants: A Review

Review of Aluminum Agglomeration During the Combustion of Solid Propellants

Agglomeration and Combustion Characteristics of Solid Composite Propellants Containing Aluminum-Based Alloys

Analysis of Agglomeration Particle Size Near the Burning Surface of Aluminized Solid Propellant Based on Digital Inline Holography

Numerical Simulation of Aluminum Particle Agglomeration Near the Burning Surface of Solid Propellants

Research progress and prospects on agglomeration models and simulation methods of aluminum particles in aluminum‐based composite propellants

Aluminum Agglomeration of AP/HTPB Composite Propellant

Aluminum Agglomeration Involving the Second Mergence of Agglomerates on the Solid Propellants Burning Surface: Experiments and Modeling

Models of aluminum agglomeration in solid propellants

Investigation on Burning Behaviors of Aluminum Agglomerates in Solid Rocket Motor with Detailed Combustion Model

New discovery of aluminium agglomeration in composite solid propellants based on microscopic heating system

Modeling of Aluminum Agglomeration at Solid Propellant Burning Surface by Combining Aluminum Ignition with LDP-SC Cluster Analysis

Experimental investigation of agglomerate sizes of burning aluminized solid propellant

Effect on primary combustion performance of aluminum particle size in fuel-rich propellant with high aluminum content

Experimental Investigation of the Combustion Products in an Aluminised Solid Propellant

Experimental study of collision of AL/AL2O3, condensed particles at various velocities by an innovative method

Oxidation Process of Aluminum Powder in Solid Propellant and Influence Factors on Its Combustion Efficiency

Reduction of Agglomeration Effect by Aluminum Trihydride in Solid Propellant Combustion

Atomic Insight into the Agglomeration Evolution Mechanism of Aluminum Nanoparticles with Core-Shell Structure

Studies on Aluminum Agglomeration and Combustion in Catalyzed Composite Propellants