Abstract:In the study of solid rocket motor (SRM) combustion instability, modeling and analyzing the combustion response of the solid propellant is a laborious task. We propose a new idea, an equivalent linear system method, for modeling solid propellant combustion response with three steps: first, simulating the transient combustion process under pulse pressure excitation for only one CFD case; then, treating the combustion process as a black-box and obtaining the transfer function of the combustion process from the CFD result; finally, predicting and analyzing the combustion response based on the transfer functions. For the AP/HTPB sandwich propellant with p ̄=3MPa, the amplitude, duration, and direction of excitation pulses are studied. The new method is also verified, with a maximum relative error of 4.3% for burning rate response under p ̃≤1MPa (as high as one-third of the pressure DC). Applicability of this new method is demonstrated for another two AP/HTPB sandwich propellants with different configuration under p ̄=8MPa and p ̄=10MPa , showing that the system-simulated combustion responses of burning surface temperature and burning rate are consisted well with the CFD results and the maximum relative error of burning rate response is 2.1%. Asymmetric combustion response for positive and negative pressure perturbations is a new finding based on the CFD and simulation results. Besides, a new approach using dual transfer functions is proposed to ensure high accuracy for the simulation of solid propellant combustion. The pressure-coupled response function is predicted by this method for the sandwich propellant under p ̄=5MPa and p ̃=20kPa within a wide continuous frequency range (0–3000 Hz). The comparison with CFD results indicates that the relative bias of R p is less than 2%. With the proposed method, the combustion response to arbitrary pressure excitations can be simulated with high accuracy, high time-resolution, and high speed. The method shows great advantage and potential in simulating and predicting combustion instability.

Experimental Method of Mixing and Combustion in Solid Propellant Air Turbo Rocket

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Preliminary experimental study on combustion characteristics in a solid rocket motor nozzle based on the TDLAS system

Experimental and Numerical Studies of Ammonium Dinitramide Based Liquid Propellant Combustion in Space Thruster

Numerical Investigation of an Aerospace Thruster with ADN-based Liquid Propellant

AP/HTPB combustion response simulation with a new equivalent linear system method

Experimental investigation of a flow-oriented throttleable injector designed for throttleable hybrid rocket motor

AN EXPERIMENTAL STUDY ON HEAT PROCESSES PROPERTES OF LIQUID PROPELLANT ROCKET EXPLOSION

Experimental research on the thermal throat of rocket based combined cycle combustor

Experimental study on ejector-to-ramjet mode transition in a divergent kerosene-fueled RBCC combustor with low total temperature inflow

Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors

Experimental study on methane-oxygen bipropellant micro-thruster

Study on the effect of combustion efficiency of variable thrust rocket engines

Effect of area ratio and heat release method on the Ma∞ = 2-6 operation performance of rocket-based combined cycle engine

Experimental study on the rocket-ejector system with a throat in the secondary stream

An Experimental System of Constant Volume Combustion Bom Bwith Variable Turbulence Parameters

Combustion Characteristics and Propulsive Performance of Boron/Ammonium Perchlorate Mixtures in Microtubes

Effect of synergistic impact gas injection device on secondary combustion in boron-based ducted rockets

Evaluation of Mixing Effect on Coupled Heat Release and Transfer Performance of a Novel Segregated Solid Rocket Motor

Experimental investigation of flow field features and spark ignition process in a multi-swirl airblast injector

Modeling of Spray Combustion and Heat Transfer of MMH/N2O4 in a Small Rocket Engine Using Different Mechanisms