Abstract:Sapphire is one of the most widely used substrate materials for semiconductor lighting. With the improvement of chemical mechanical polishing (CMP) processing technology for sapphire substrate, mass production, and cost control requires faster polishing efficiency and better surface quality. In CMP, alumina abrasive is widely used for its high polishing rate, but it also has the disadvantages of easy agglomeration and poor polishing quality. Therefore, ethylenediamine tetraacetic acid (EDTA)-grafted alumina composite abrasives were produced by a two-step process for the sapphire substrate CMP. As demonstrated by time of flight secondary ion mass spectrometry and fourier transform infrared spectroscopy, EDTA has been successfully grafted onto the surface of alumina particles. As shown by the scanning electron microscope, particle size distribution, and zeta potential analyses, the modified alumina composite abrasives exhibit superior dispersion properties than pure alumina particles. CMP experiment results show that the material removal rate (MRR) of the alumina composite abrasives can reach up to 2.6 μm/h, and the surface roughness (Sa) of the sapphire substrate can be reduced to 0.89 nm, which is 53 % higher and 66 % lower than pure alumina, respectively. According to X-ray photoelectron spectroscopy, the chemical etch of modified abrasive particles was strengthened, and the complex reaction occurred throughout the CMP process to generate the C–O–Al structural compound. Meanwhile, the friction coefficient test and contact angle test were combined to create the contact wear model. It shows that the addition of EDTA expands the contact area between the composite abrasives and the surface of substrates, improving the mechanical interaction during CMP. The chemical reaction and mechanical action combine and promote each other to enhance the CMP performance.

Highly Efficient Removal of Sapphire by Composite Nanoabrasive with Novel Inorganic Polyelectrolyte As a Binder

Polishing Performance and Removal Mechanism of Core-Shell Structured Diamond/SiO2 Abrasives on Sapphire Wafer

Fe-Nx/C Assisted Chemical–mechanical Polishing for Improving the Removal Rate of Sapphire

Machining performance and material removal mechanism of sapphire with novel polishing slurry

AFM and XPS Studies on Material Removal Mechanism of Sapphire Wafer During Chemical Mechanical Polishing (CMP)

Chemical mechanical polishing for sapphire wafers using a developed slurry

Study on the polishing performance and mechanism of sapphire wafers by different types of degradable surfactants

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing

A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance

Study on Chemical Mechanical Polishing Performances of Sapphire Wafer (0001) Using Silica-Based Slurry

Polymer coated γ-aminopropyltriethoxysilane-modified α-alumina non-spherical nanocomposite abrasives and their chemical mechanical polishing behavior on glass-ceramic substrate

Preparation of Non-spherical Colloidal Silica Nanoparticle and Its Application on Chemical Mechanical Polishing of Sapphire

Effect of EDTA-modified alumina composite abrasive on the CMP performance of sapphire substrate

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing

Preparation of a Novel Catalyst (sofeiii) and Its Catalytic Performance Towards the Removal Rate of Sapphire Substrate During CMP Process

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Optimizing of the Colloidal Dispersity of Silica Nanoparticle Slurries for Chemical Mechanical Polishing

Trivalent lanthanum and ytterbium doped meso-silica/ceria abrasive systems toward chemical mechanical polishing (CMP) and ultraviolet irradiation-assisted photochemical mechanical polishing (PCMP)

Nanomaterials and Equipment for Chemical-Mechanical Polishing of Single-Crystal Sapphire Wafers

A study on mechanism of sapphire polishing using the diamond abrasive by molecular dynamics

Methods and Mechanistic Analysis of Improving the Dispersion of Nano Silica Colloidal Particles in Chemical Mechanical Polishing Slurries