Abstract:In this study, a resistive humidity sensor for moisture detection at room temperature is presented. The thin film proposed as a critical sensing element is based on a quaternary hybrid nanocomposite CNHox//SnO2/ZnO/PVP (oxidated carbon nanohorns–tin oxide–zinc oxide–polyvinylpyrrolidone) at the w/w/w/w ratios of 1.5/1/1/1 and 3/1/1/1. The sensing structure consists of a Si/SiO2 dielectric substrate and interdigitated transducers (IDT) electrodes, while the sensing film layer is deposited through the drop-casting method. Morphology and composition of the sensing layers were investigated through scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction, and Raman spectroscopy. Each quaternary hybrid nanocomposite-based thin film’s relative humidity (RH) sensing capability was analyzed by applying a direct current with known intensity between two electrodes and measuring the voltage difference when varying the RH from 0% to 100% in a humid nitrogen atmosphere. While the sensor with CNHox/SnO2/ZnO/PVP at 1.5/1/1/1 as the sensing layer has the better performance in terms of sensitivity, the structure employing CNHox//SnO2/ ZnO/PVP at 3/1/1/1 (mass ratio) as the sensing layer has a better performance in terms of linearity. The contribution of each component of the quaternary hybrid nanocomposites to the sensing performance is discussed in relation to their physical and chemical properties. Several alternative sensing mechanisms were taken into consideration and discussed. Based on the measured sensing results, we presume that the impact of the p-type semiconductor behavior of CNHox, in conjunction with the swelling of the hydrophilic polymer, is dominant and leads to the overall increasing resistance of the sensing film.

Chemiresistive Humidity Sensor Based on Chitosan/zinc Oxide/single-Walled Carbon Nanotube Composite Film

Humidity Sensitivity of Carbon Nanotube and Poly (dimethyldiallylammonium Chloride) Composite Films

Humidity sensors based on the composite of multi-walled carbon nanotubes and crosslinked polyelectrolyte with good sensitivity and capability of detecting low humidity

Fast response humidity sensor based on chitosan/graphene oxide/tin dioxide composite

Humidity Sensors Using in Situ Synthesized Sodium Polystyrenesulfonate/zno Nanocomposites.

QCM-based Humidity Sensor and Sensing Properties Employing Colloidal SnO2 Nanowires

High-sensitivity QCM humidity sensor based on chitosan/carboxymethylated multiwalled carbon nanotubes composite for non-contact respiratory monitoring

Sensitive and flexible humidity sensor based on sodium hyaluronate/MWCNTs composite film

Nanochitin/MXene Composite Coated on Quartz Crystal Microbalance for Humidity Sensing

Humidity Sensing Properties of the Composite of Electrospun Crosslinked Polyelectrolyte Nanofibers Decorated with Ag Nanoparticles

An Excellent Humidity Sensor Made of Surface Acoustic Wave Resonator Coated with MWCNTs/Nafion Composite Material Films

A Novel Resistive Humidity Sensor Based On Sodium Polystyrenesulfonate/Tio2 Nanocomposites

Flexible Humidity Sensors Based on Multidimensional Titanium Dioxide/Cellulose Nanocrystals Composite Film

A Novel Humidity Sensor Based on Carbon Black/poly(4-vinylpyridine) Nanocomposite

Carboxymethyl Cellulose/Graphene Oxide Composite Film-Coated Humidity Sensor Based on Thin-Core Fiber Mach-Zehnder Interferometer

Bilayer-structured Nanocomposite of Ag and Crosslinked Polyelectrolyte for the Detection of Humidity

Highly Sensitive Humidity Sensors Based on Polyethylene Oxide/CuO/Multi Walled Carbon Nanotubes Composite Nanofibers

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film.

A RESISTIVE-TYPE NANOSTRUCTURED HUMIDITY SENSOR PREPARED BY ELECTROSPINNING

Quaternary Holey Carbon Nanohorns/SnO2/ZnO/PVP Nano-Hybrid as Sensing Element for Resistive-Type Humidity Sensor

Surface Acoustic Wave Humidity Sensor Based on Flake-like Nanodiamond-chitosan Composite Sensitive Film