Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Zero-Dimensional Cs2TeI6 Perovskite: Solution-Processed Thick Films with High X-ray Sensitivity

X-ray Sensor Based on Pixelated Scintillation Film on Photodiode Arrays

One-Dimensional Orthorhombic Cspbi3 Polycrystalline Thick Film for Efficient and Highly Stable Direct X-Ray Detection and Imaging

Eradicating Impurities in Zero-Dimensional Metal Lead Halide Perovskite Films for Stable, Low Dark Current X-ray Detectors

All-Vacuum-Deposited Perovskite X-ray Detector with a Record-High Self-Powered Sensitivity of 1.2 C Gy –1 cm –3

Self‐Powered X‐Ray Detector Based on All‐Inorganic Perovskite Thick Film with High Sensitivity under Low Dose Rate

Nonstoichiometry Promoted Solventless Recrystallization of a Thick and Compact CsPbBr3 Film for Real-Time Dynamic X-Ray Imaging

Highly Resolved X‐Ray Imaging Enabled by In(I) Doped Perovskite‐Like Cs 3 Cu 2 I 5 Single Crystal Scintillator

CsPbIBr2 Thick Film With (100)‐Preferred Orientation Enables Highly Sensitive X‐Ray Detector by a Spray‐Coating Method via Dual‐Additive‐Assisted Solution Strategy under Atmospheric Environment

An aerosol-liquid-solid process for the general synthesis of halide perovskite thick films for direct-conversion X-ray detectors

Highly Sensitive X‐Ray Detector Made of Large Lead‐Free Perovskite Cs3Bi2I9 Single Crystals with Anisotropic Response

Vapor-deposited lead-free all-inorganic perovskite films with ultralow dark current for sensitive and stable X-ray detection

Evaporated Perovskite Thick Junctions for X-Ray Detection

Smooth and Compact All‐Inorganic Perovskite Based Heterojunction Films Enabled by Nanocomposite‐Buffered Thermal Imprint for Highly Sensitive X‐Ray Detection

Encapsulated X-Ray Detector Enabled by All-Inorganic Lead-Free Perovskite Film With High Sensitivity and Low Detection Limit

A solution-processed zero-dimensional all-inorganic perovskite scintillator for high resolution gamma-ray spectroscopy detection.

High-Stability Flexible X-ray Detectors Based on Lead-Free Halide Perovskite Cs 2 TeI 6 Films

Inch-Size 0D-Structured Lead-Free Perovskite Single Crystals for Highly Sensitive Stable X-Ray Imaging

X-Ray Detector Based on All-Inorganic Lead-Free Cs 2 AgBiBr 6 Perovskite Single Crystal

Ultrasensitive and Robust 120 keV Hard X‐Ray Imaging Detector based on Mixed‐Halide Perovskite CsPbBr 3− n I n Single Crystals

Lead-Free Bismuth-Based Perovskite X-ray Detector with High Sensitivity and Low Detection Limit