Abstract:Gate oxide breakdown (OBD) is a key factor limiting the useful lifetime of an integrated circuit. Unfortunately, the conventional approach for full chip OBD reliability analysis assumes a uniform oxide thickness and worst-case temperature for all devices. In practice, however, gate oxide thickness varies from die-to-die and within-die and hence may cause different reliability for different devices even chips. Moreover, due to the increased across-die temperature variation, such difference may be exacerbated. Thus, as the precision of variation control worsens, an alternative reliability analysis approach is needed. In this paper, we propose a statistical framework for chip-level gate OBD reliability analysis while considering both die-to-die and within-die components of thickness variations as well as the across-die temperature variation. The thickness of each device is modeled as a distinct random variable and thus the full chip reliability estimation problem is defined on a huge sample space of several million devices. We observe that the chip-level OBD reliability function is independent of the relative location of the individual devices. This enables us to transform the problem such that the resulting representation can be expressed in terms of much fewer random variables. Using this transformation, we present a computationally efficient and accurate approach for estimating the full chip reliability while considering spatial correlations of gate oxide thickness as well as temperature variation. We show that, compared to Monte Carlo simulation, the proposed method incurs an error of only around 1% while improving the runtime by more than three orders of magnitude.

Impact Of Bti Aging Effect And Process Variation On Single Event Upset Of Dice

Impact of Hot Carrier Degradation and Bias Temperature Instability on GHz Cycle-to-Cycle Variation in Ultra-Scaled FinFETs

Process Variation and Temperature-Aware Full Chip Oxide Breakdown Reliability Analysis.

Factors for Negative Bias Temperature Instability Improvement in Deep Sub-Micron CMOS Technology

Effect of NBTI/PBTI Aging and Process Variations on Write Failures in MOSFET and FinFET Flip-Flops

Investigation on NBTI-induced dynamic variability in nanoscale CMOS devices: Modeling, experimental evidence, and impact on circuits.

Investigation of the NBTI induced mobility degradation for precise circuit aging simulation

Bias Temperature Instability Model Using Dynamic Defect Potential for Predicting CMOS Aging

Statistical Reliability Analysis under Process Variation and Aging Effects

New Insights into the Design for End-of-life Variability of NBTI in Scaled High-Κ/metal-gate Technology for the Nano-Reliability Era

Impact of negative bias temperature instability on single event transients in scaled logic circuits

Towards The Systematic Study Of Aging Induced Dynamic Variability In Nano-Mosfets: Adding The Missing Cycle-To-Cycle Variation Effects Into Device-To-Device Variation

Reliability variability simulation methodology for IC design: An EDA perspective

Evaluation of MOS Interface Trap Generation after BTI Stress Using Flicker Noise

PBTI and HCI Degradations of Ultrathin Body InGaAs-On-Insulator Nmosfets Fabricated by Wafer Bonding

System-level variation-aware aging simulator using a unified novel gate-delay model for bias temperature instability, hot carrier injection, and gate oxide breakdown

Accelerated Aging in Analog and Digital Circuits with Feedback

Understanding NBTI-induced Dynamic Variability in the Nano-Reliability Era: from Devices to Circuits

NBTI-related issues in deep submicron pMOSFETs

Analysis of Functional Errors Produced by Long-Term Workload-Dependent BTI Degradation in Ultralow Power Processors

Interaction of Negative Bias Instability and Self-Heating Effect on Threshold Voltage and SRAM (Static Random-Access Memory) Stability of Nanosheet Field-Effect Transistors