Abstract:This paper applies an energy method based on the high-order smooth curvature model to address the challenges of kinetostatically modeling the complicated nonlinear post-buckling behavior of inclined compliant beams. The proposed energy method is grounded in the principle of minimum strain energy, implying that the total strain energy is minimized at the equilibrium configuration. In this work, the high-order smooth curvature model is adopted to accurately model the bending strain energy of large deformation beams. Subsequently, the Lagrange multiplier method is employed to ascertain the minimum of strain energy while concurrently determining the corresponding tip loads. Additionally, the deformation shape and maximum stress are determined via the smooth curvature model. The proposed method is introduced for the first time in modeling compliant bistable mechanisms, and it is proven that the method can be used for modeling compliant beams with inclined angles ranging from 0 to 90 degrees. Following the modeling, finite element analysis and experimental tests are conducted to verify the accuracy of the proposed energy method. A comprehensive comparative analysis between proposed method and existing methods is conducted. The comparison results prove that the model is more computationally efficient without compromising modeling accuracy The proposed modeling method can not only be used for modeling compliant bistable mechanisms but also has extendable applications in modeling initially-curved compliant beams, contact-aid design problems, and distributed load problems.The present work not only advances the practical application of the proposed energy method but also lays the foundation for future research in modeling compliant mechanisms.

Influence of Non-Ideal Fixed-End Constraints on Kinetostatic Behaviors of Compliant Bistable Mechanisms

Kinetostatic Modeling of Fully Compliant Bistable Mechanisms Using Timoshenko Beam Constraint Model

Kinetostatic Modeling and Characterization of Compliant Mechanisms Containing Flexible Beams of Variable Effective Length

An Energy-Based Framework for Nonlinear Kinetostatic Modeling of Compliant Mechanisms Utilizing Beam Flexures

A Framework For Energy-Based Kinetostatic Modeling Of Compliant Mechanisms

Modeling compliant bistable mechanisms: An energy method based on the high-order smooth curvature model

Fully compliant bistable mechanisms with enhanced pitch stiffness

A Body-frame Beam Constraint Model

Chained Beam-Constraint-Model (Cbcm): A Powerful Tool For Modeling Large And Complicated Deflections Of Flexible Beams In Compliant Mechanisms

Modeling Large Planar Deflections of Flexible Beams in Compliant Mechanisms Using Chained Beam-Constraint-Model1

On the comprehensive static characteristic analysis of a translational bistable mechanism

Analytical Modeling for Rapid Design of Bistable Buckled Beams

A Function for Characterizing Complete Kinetostatic Behaviors of Compliant Bistable Mechanisms

A Novel Fully Compliant Tensural-Compresural Bistable Mechanism

Kinetostatic Modeling and Optimization of a Novel Horizontal-Displacement Compliant Mechanism

A Substructure Condensed Approach for Kinetostatic Modeling of Compliant Mechanisms with Complex Topology.

A General Discretization-Based Approach for the Kinetostatic Analysis of Closed-Loop Rigid/Flexible Hybrid Mechanisms.

Design of a Novel Compliant Constant-Force Mechanism with High Lateral Stiffness

Large-Stroke Constant-Force Mechanisms Utilizing Second Buckling Mode of Flexible Beams: Evaluation Metrics and Design Approach

Design, Analysis, Experimentation, and Control of a Partially Compliant Bistable Mechanism

Kinetostatic Modeling of Complex Compliant Mechanisms with Serial-Parallel Substructures: A Semi-Analytical Matrix Displacement Method