Abstract:The use of general tensegrity systems that incorporate rigid bodies beyond axially loaded members has garnered increasing attention in practical applications. Recent preliminary studies have been conducted on the analysis and form design of general tensegrity systems with disconnecting rigid bodies. However, existing methods cannot account for connections between different rigid bodies. In practical applications, general tensegrity systems may have interconnected rigid bodies, rendering the analysis method proposed in previous studies inapplicable. To address this issue, this work proposes a comprehensive and unified analysis method for general tensegrity systems. The proposed formulation allows for the incorporation of connections between rigid bodies and general tensegrity systems with supports into the developed framework, enabling uniform analysis. Equilibrium and compatibility equations are derived through an energy approach combined with the Lagrange multiplier method. Self-stress states and mechanism modes are then computed based on these formulations. The stiffness of the mechanism mode is analyzed and validated using both the product force method and the reduced geometric stiffness matrix method. Furthermore, a self-stress design approach based on semi-definite programming (SDP) is proposed to determine feasible member forces that can stabilize general tensegrity systems. Illustrative examples are presented to verify the effectiveness of the proposed approach. This study expands the scope of the analysis theory for tensegrity systems and provides a fundamental and unified analysis approach that can be applied to any type of tensegrity system.

A General Discretization-Based Approach for the Kinetostatic Analysis of Closed-Loop Rigid/Flexible Hybrid Mechanisms.

Kinematic Path Analysis of Kinematically Indeterminate Systems

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

A General Approach to the Large Deflection Problems of Spatial Flexible Rods Using Principal Axes Decomposition of Compliance Matrices

Vector Form Intrinsic Finite Element Method for Planar Multibody Systems with Multiple Clearance Joints

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

Dynamic behavior analysis of rigid-flexible coupling planar mechanism considering dry clearances and lubrication clearances

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

A Novel Mechanical Model Based on the Dynamic Stiffness Matrix for Unified Dynamic and Static Modeling of Planar Compliant Mechanisms

On The Method Of Linearizing Dynamic-Model And Solving Forward Dynamic Problems Of Flexible Robots

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Rigid-Flexible Coupling Dynamics Modeling of Spatial Crank-Slider Mechanism Based on Absolute Node Coordinate Formulation

A Novel Iterative Method of Determining the Pose Error of Planar Clearance-Affected Flexible Parallel Mechanisms Under Loaded Mode

Analytical Compliance Modeling of Serial Flexure-Based Compliant Mechanism under Arbitrary Applied Load

Study on nonlinear dynamics of rigid-flexible coupling multi-link mechanism considering various kinds of clearances

Dynamic modeling and analysis of multi-link mechanism considering lubrication clearance and flexible components

Kinematic modeling and optimal design of a partially compliant four-bar linkage using elliptic integral solution

A Pseudo-Static Model for Dynamic Analysis on Frequency Domain of Distributed Compliant Mechanisms

Enabling the transfer matrix method to model serial–parallel compliant mechanisms including curved flexure beams