Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Kinetostatic Modeling of Fully Compliant Bistable Mechanisms Using Timoshenko Beam Constraint Model

Modeling Large Deflections of Initially Curved Beams in Compliant Mechanisms Using Chained Beam Constraint Model

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Large Deformation Mechanical Modeling with Bilinear Stiffness for Macro-Fiber Composite Bimorph Based on Extending Mixing Rules

A comprehensive static modeling methodology via beam theory for compliant mechanisms

Fully compliant bistable mechanisms with enhanced pitch stiffness

Large-Stroke Constant-Force Mechanisms Utilizing Second Buckling Mode of Flexible Beams: Evaluation Metrics and Design Approach

Modeling compliant bistable mechanisms: An energy method based on the high-order smooth curvature model

Analytical Modeling for Rapid Design of Bistable Buckled Beams

Discrete Deformation Models for Real-Time Computation of Compliant Mechanisms in Two- and Three-Dimensional Space

A Novel Mechanical Model Based on the Dynamic Stiffness Matrix for Unified Dynamic and Static Modeling of Planar Compliant Mechanisms

Design and optimization of compliant constant-torque mechanisms utilizing arbitrary pre-curved beams

A modified strain gradient beam constraint model

Enabling the transfer matrix method to model serial–parallel compliant mechanisms including curved flexure beams

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

Design, Analysis, Experimentation, and Control of a Partially Compliant Bistable Mechanism

Design of compliant constant-output-force mechanisms using topology optimization

On the comprehensive static characteristic analysis of a translational bistable mechanism

Graphic Transfer Matrix Method for Kinetostatic and Dynamic Analyses of Compliant Mechanisms

Design and Testing of a Novel Nested, Compliant, Constant-Force Mechanism with Millimeter-Scale Strokes