Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Chained Beam-Constraint-Model (Cbcm): A Powerful Tool For Modeling Large And Complicated Deflections Of Flexible Beams In Compliant Mechanisms

Modeling Large Planar Deflections of Flexible Beams in Compliant Mechanisms Using Chained Beam-Constraint-Model1

Modeling Large Deflections of Initially Curved Beams in Compliant Mechanisms Using Chained Beam Constraint Model

Modeling Large Spatial Deflections of Slender Bisymmetric Beams in Compliant Mechanisms Using Chained Spatial-Beam Constraint Model

A Body-frame Beam Constraint Model

Nonlinear Analysis of Moderately Large-Stroke Flexure Beams in Compliant Mechanisms Using a Dynamic Beam Constraint Model (DBCM)

A comprehensive static modeling methodology via beam theory for compliant mechanisms

Kinetostatic Modeling of Fully Compliant Bistable Mechanisms Using Timoshenko Beam Constraint Model

Bi-BCM: A Closed-Form Solution for Fixed-Guided Beams in Compliant Mechanisms

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Modeling Large Spatial Deflections of Slender Beams of Rectangular Cross Sections in Compliant Mechanisms

Large-Deflection Analysis of General Beams in Contact-Aided Compliant Mechanisms Using Chained Pseudo-Rigid-Body Model

Extending Timoshenko Beam Theory for Large Deflections in Compliant Mechanisms

Determining the range of allowable axial force for the third-order Beam Constraint Model

A modified strain gradient beam constraint model

Discrete Deformation Models for Real-Time Computation of Compliant Mechanisms in Two- and Three-Dimensional Space

Kinetostatic Modeling and Characterization of Compliant Mechanisms Containing Flexible Beams of Variable Effective Length

A CPRBM-based Method for Large-Deflection Analysis of Contact-Aided Compliant Mechanisms Considering Beam-to-beam Contacts

Large-Stroke Constant-Force Mechanisms Utilizing Second Buckling Mode of Flexible Beams: Evaluation Metrics and Design Approach

Design of a Novel Compliant Constant-Force Mechanism with High Lateral Stiffness

Nonlinear closed-form model for beam flexures subject to large axial loads