Abstract:Beam-based compliant mechanisms have been widely used in many precision applications due to their large-displacement characteristic. Meanwhile, a simple and accurate analytical tool is no doubt useful to assist design and optimize these mechanisms. The pseudo-rigid-body (PRB) model is such a good alternative. The PRB model in a traditional sense, however, is too approximate to calculate some precise characteristics such as center-shift of a flexural joint. In this paper, a new method is proposed to easily establish simple and accurate PRB models for a variety of beam-based compliant mechanisms. As is well known, for most of the beam-based compliant mechanisms, there is usually an instantaneous center of rotation (ICR) on each beam, and the beam can be considered as a fixed-guided beam with one end fixed while the other end moves along a certain curve that usually is an approximate arc around the ICR. In this case, the behavior of beams can be imitated by a rigid bar with two pin-joints. One of the pin-joints is directly added at the end of the rigid bar. The position of the other is determined by the characteristic radius factor, and a torsional spring is added at the position to represent the beam's stiffness. The modeling method is used to analyze two commonly used beam-based compliant mechanisms as examples, i.e. a parallel linear spring stage and a cross strip pivot. The performances of precision, stiffness and stroke for the two mechanisms are investigated, and the method is validated by comparing the results with other research work presented in the literatures. Both cases show the method is intuitive and accurate, and it will be useful in the early phases of the design for beam-based compliant mechanisms.

Bi-BCM: A Closed-Form Solution for Fixed-Guided Beams in Compliant Mechanisms

Chained Beam-Constraint-Model (Cbcm): A Powerful Tool For Modeling Large And Complicated Deflections Of Flexible Beams In Compliant Mechanisms

Kinetostatic Modeling of Fully Compliant Bistable Mechanisms Using Timoshenko Beam Constraint Model

Modeling Large Planar Deflections of Flexible Beams in Compliant Mechanisms Using Chained Beam-Constraint-Model1

A Modified Pseudo-Rigid-body Modeling Approach for Compliant Mechanisms with Fixed-Guided Beam Flexures

A Body-frame Beam Constraint Model

Nonlinear Analysis of Moderately Large-Stroke Flexure Beams in Compliant Mechanisms Using a Dynamic Beam Constraint Model (DBCM)

Modeling Large Deflections of Initially Curved Beams in Compliant Mechanisms Using Chained Beam Constraint Model

Extending Timoshenko Beam Theory for Large Deflections in Compliant Mechanisms

A comprehensive static modeling methodology via beam theory for compliant mechanisms

Modeling Large Spatial Deflections of Slender Bisymmetric Beams in Compliant Mechanisms Using Chained Spatial-Beam Constraint Model

Analysis of a Fixed-Guided Compliant Beam With an Inflection Point Using the Pseudo-Rigid-Body Model Concept

Determining the range of allowable axial force for the third-order Beam Constraint Model

An effective pseudo-rigid-body method for beam-based compliant mechanisms

A modified strain gradient beam constraint model

Design of a Novel Compliant Constant-Force Mechanism with High Lateral Stiffness

Large-Deflection Analysis of General Beams in Contact-Aided Compliant Mechanisms Using Chained Pseudo-Rigid-Body Model

A CPRBM-based Method for Large-Deflection Analysis of Contact-Aided Compliant Mechanisms Considering Beam-to-beam Contacts

Modeling and Analysis of Beam Flexure Based Double Parallel Guiding Mechanisms: A Modified Pseudo-Rigid-Body Approach

Kinetostatic Modeling and Characterization of Compliant Mechanisms Containing Flexible Beams of Variable Effective Length

Large-Stroke Constant-Force Mechanisms Utilizing Second Buckling Mode of Flexible Beams: Evaluation Metrics and Design Approach