Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Research on a Four-Phase Fault-Tolerant Permanent-Magnet Machine for Aerospace Application

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Comparison Between Dual-Armature Linear Switched Flux Permanent Magnet Machine and Linear Surface-Mounted Permanent Magnet Machine Considering Thermal Conditions

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

A Novel Dual Permanent Magnet Fault-Tolerant Vernier Machine with Hybrid Stator Configuration

A triple 3-phase fault-tolerant fractional slot concentric winding interior permanent-magnet machine with low space harmonics

Design to Reduce Rotor Losses in Fault-Tolerant Permanent-Magnet Machines

Design of Five-Phase Modular Flux-Switching Permanent-Magnet Machines for High Reliability Applications

Design and performance analysis of a novel flux-concentrating fault tolerant permanent magnet vernier machine for rim driven thruster

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Uneven Demagnetization Fault Diagnosis in Dual Three-Phase Permanent Magnet Machines Based on Electrical Signal Difference

The Electromagnetic Propeller Based on a Five-Phase Fault-Tolerant Permanent-Magnet Machine

Harmonic Analysis And Fault-Tolerant Capability Of A Semi-12-Phase Permanent-Magnet Synchronous Machine Used For Evs

Comparisons of Permanent-Magnet Machines with Different Rotor Topologies for Quadruped Robot

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Two short-circuit fault tolerant strategies for four-phase permanent-magnet fault-tolerant machine

A Hybrid-Slot Radial-Flux Dual-Stator Permanent-Magnet Machine With Fault-Tolerant Consideration