Abstract:For electric vehicles (EVs), permanent magnet synchronous motors (PMSMs) are competitive owing to their high power factor, high efficiency and high power density. In this paper, four types of PMSMs with different rotor topologies are designed with the same motor main dimensions and the same amount of permanent magnet usage. First, the different PMSMs are compared in terms of their torque characteristics. The torque characteristic curves of the four motors are displayed with the control method i(d)=0 for surface-mounted PMSM (SPMSM) and Maximum Torque per Ampere (MTPA) for interior PMSM (IPMSM). It turns out that IPMSM has higher starting torque than SPMSM due to the reluctance torque. Among the three IPMSMs with different rotor structures, V-shape IPMSM and delta-shape IPMSM can provide higher output torque under the same current supply with the higher salient rate. More information on the no-load magnetic density, torque ripple, efficiency and demagnetization problem operated at the peak current is also provided and compared. Then the four PMSMs with the same peak current are further analyzed and compared on the flux-weakening speed-enlarge (FWSE) capability. The results show good FWSE capability for all of the four PMSMs owing to the large peak current. However, the torque of SPMSM in flux-weakening control region is slightly higher than the IPMSMs.

Comparisons of Permanent-Magnet Machines with Different Rotor Topologies for Quadruped Robot

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Electromagnetic Performance Comparison of Doubly Salient PM Machines with Different Stator Iron Core Segments

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Design of a 24-slot/22-pole Permanent Magnet Synchronous Motor for Quadruped Robot

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Investigation of a Novel Hybrid Less-Rare-Earth Consequent-Pole Interior Permanent Magnet Machine with Asymmetric Rotor

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Comparison of PMSMs with Different Rotor Structures for EV Application

Comparative Study Between Doubly Salient PM Machine with New Stator/Rotor-Pole Number Combination and Biased Flux PM Machine

Comparisons of Concentrated Fractional Winding and Distributed Winding of Permanent Magnet Synchronous Motors for Biped Robot

Comparative Study of Biased Flux PM Machines Having Different Stator Core Segments and Armature Winding Configurations

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

A Comparative Study on Two Outer Rotor PMSMs for In-Wheel Direct Drive under Short-Circuit Faults