Abstract:A proton exchange membrane (PEM) fuel cell is one of the highly efficient hydrogen utilization devices. However, due to the complex physical and chemical processes in fuel cells, developing a mathematical model of the PEM fuel cell is challenging. In this study, a new coupled model based on the computational fluid dynamics method and a 1D model is proposed for the accurate and fast prediction of PEM fuel cell performance. First of all, the proposed model is validated using the literature data. It is then applied to simulate the distribution and evolution of the current density, hydrogen and oxygen mass fraction, and membrane water content in catalyst layer (CL). Results show that the increase in the current density is attributed to the increase in the consumption rate of hydrogen and oxygen and the increase in the membrane water content. In addition, the stabilized supply of the oxygen in cathode and the membrane water content in the anode CL are critical for the improvement of the fuel cell performance. For the cases studied in this research, when the output voltage decreases from 0.6 V to 0.3 V, the current density increases from 5738.1 A/m2 to 15171.2 A/m2. The average oxygen mass fraction in the cathode CL and the average membrane water content in the anode CL decreased by 42.3 % and 9.6 %, respectively. In addition, when the fuel cell starts up at 0.6 V, the concentration of hydrogen and oxygen drops gradually decreases along the flow direction of the CL, while the membrane water content rapidly increases initially, and then increases slowly, with the turning point around at approximately 2.2 x 10-3 m. Under the combined effect of hydrogen and oxygen concentration, as well as the membrane water content, the current density first increases and then decreases, with the maximum value exceeding 6500 A/m2.

Verification of a cathode pressure drop model for single phase flow in a proton exchange membrane fuel cell

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Novel approach to determine cathode two-phase-flow pressure drop of proton exchange membrane fuel cell and its application on water management

Numerically Investigating Two-Phase Reactive Transport in Multiple Gas Channels of Proton Exchange Membrane Fuel Cells

Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells

Analytical Calculation and Evaluation of Water Transport Through a Proton Exchange Membrane Fuel Cell Based on a One-Dimensional Model

Cfd Based Two-Phase Modelling of Proton Exchange Membrane Fuel Cell with Interdigitated Flow Field

Modeling of Membrane Electrode Assembly of PEM Fuel Cell to Analyze Voltage Losses Inside

Simulation of Water Transport in Proton Exchange Membrane Fuel Cell Using a One-dimension Model

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell

Analysis of Water Management in Proton Exchange Membrane Fuel Cells

Illustrative Case Study on the Performance and Optimization of Proton Exchange Membrane Fuel Cell

Model-based estimation of liquid saturation in cathode gas diffusion layer and current density difference under proton exchange membrane fuel cell flooding

Water transport model for cathode of PEMFC

Modeling and analysis of water vapor dynamics in high-temperature proton exchange membrane fuel cell coupling gas-crossover phenomena

A Semiempirical Dynamic Model of Reversible Open Circuit Voltage Drop in a PEM Fuel Cell

Variation Characteristic Analysis of Water Content at the Flow Channel of Proton Exchange Membrane Fuel Cell

Numerical simulation of two-phase flow in a multi-gas channel of a proton exchange membrane fuel cell

Modeling of a Novel Cathode Flow Field Design with Optimized Sub-Channels to Improve Drainage for Proton Exchange Membrane Fuel Cells

Study on the Effect of Temperature on Pressure Drop and Under-Rib Convection in PEMFC

Modeling of 5 kW air-hydrogen proton-exchange membrane fuel stack