Abstract:Design of the membrane electrode assembly (MEA) plays a crucial role in polymer electrolyte membrane fuel cells (PEMFCs). However, predictive modeling of mass, charge and heat transport considering primary microstructural information rather than previously measured effective transport properties is challenged by the multiscale pore structure found in an MEA, which spans around 4-5 orders of magnitude (from tens of nanometers in the catalyst layer to tens of micrometers in the gas diffusion layer). It is not clear how to incorporate microstructural information to guide design, while preserving moderate computational cost (see log-scale pore size distribution in an MEA in Figure a). In this work, a 3D two-phase, non-isothermal model is presented, which combines continuum and pore network (PN) formulations in a single CFD framework. Transport at fine pore scales of the catalyst layer and the microporous layer (below 1 um) is modeled by means of a continuum bundle-of-capillary-tubes (BCT) submodel, and transport at coarse pore scales of the gas diffusion layer and manufacturing defects above 1 um (cracks, gaps, etc.) by means of a continuum-based PN submodel. The BCT submodel accounts for microscopic (<20 nm), mesoscopic (20-300 nm) and macroscopic (300 nm-1 um) pore scales considering a subdivision of pore size distributions in the integral volume-averaged formulation. The interplay between pore size distribution and wettability of the various porous layers is analyzed, with a focus on the role of microporous layer wettability and defects, depending on operating relative humidity and temperature (see water distribution in Figure b from an invasion-percolation simulation). Best design practices of porous assemblies are extracted for maximum performance from a large computational campaign, including stochastic effects from different sample realizations. Analysis of degradation phenomena will be the focus of subsequent work to determine optimal microstructures arising from a trade-off between performance and durability. Figure 1

Modeling of Membrane Electrode Assembly of PEM Fuel Cell to Analyze Voltage Losses Inside

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Modeling of Two-Phase Transport in Proton Exchange Membrane Electrolyzer Cells for Hydrogen Energy

Numerical Modeling and Performance Prediction of Water Transport for PEM Fuel Cell

Analytical Calculation and Evaluation of Water Transport Through a Proton Exchange Membrane Fuel Cell Based on a One-Dimensional Model

Modeling Two-Phase Transport on the PEM Water Electrolyzer

Electrochemical Performance Modeling of A Proton Exchange Membrane Electrolyzer Cell for Hydrogen Energy

A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA

Effects of Membrane Electrode Assembly Properties on Two-Phase Transport and Performance in Proton Exchange Membrane Electrolyzer Cells

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell

Modeling and analysis of internal water transfer behavior of PEM fuel cell of large surface area

Simulation of Water Transport in Proton Exchange Membrane Fuel Cell Using a One-dimension Model

Dynamic Modeling of Pt Degradation and Mitigation Strategies in Polymer Electrolyte Membrane Fuel Cells

Modeling of Catalyst Degradation in Polymer Electrolyte Membrane Fuel Cells Applied to Three‐Dimensional Computational Fluid Dynamics Simulation

Numerical Simulation of Charge Transport in Proton Exchange Membrane Fuel Cells

Multiscale Modeling of the Membrane Electrode Assembly in Polymer Electrolyte Fuel Cells: Interaction of Pore Size and Wettability of Porous Layers

One-dimensional dynamic model of a PEM fuel cell for analyzing through-plane species distribution and irreversible losses under various operating conditions

A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell

Study on water and oxygen transfer characteristics of HT-PEM fuel cells

Analysis of Multiphase Transport Phenomena in Pemfcs by Incorporating Microscopic Model for Catalyst Layer Structures