Abstract:Polyimide (PI) composite films with enhanced mechanical properties were prepared by incorporating modified fumed silica (FS) particles while preserving their optical and thermal characteristics. The PI matrix was synthesized using a fluorinated diamine, a fluorinated dianhydride, and a rigid biphenyl dianhydride via chemical imidization. Commercially available FS particles, including unmodified FS particles (0-FS) and particles modified with dimethyl (2-FS), trimethyl (3-FS), octyl (8-FS), octamethylcyclotetrasiloxane (D4-FS), and polydimethylsiloxane (PDMS-FS) were used. Scanning electron microscope images and nitrogen adsorption–desorption isotherms revealed well-defined porous structures in the FS particles. The water contact angles on the composite films increased compared to those of the pristine PI films, indicating improved water resistance. The PI/0-FS films exhibited a typical trade-off relationship between tensile modulus and elongation at break, as observed in conventional composites. Owing to the poor compatibility and agglomeration of the PDMS-FS particles, the PI/PDMS-FS composite films exhibited poor mechanical performance and diminished optical characteristics. Although the longer-chained FS particles (8- and D4-FS) improved the tensile modulus of the PI film by up to 12%, a reduction of more than 20% in toughness was observed. The PI composite films containing the methylated FS particles (2- and 3-FS) outperformed 8- and D4-FS in terms of mechanical properties, with PI/3-FS films showing an over 10% increased tensile modulus (from 4.07 to 4.42 GPa) and 15% improved toughness (from 6.97 to 8.04 MJ/m3) at 7 wt. % silica loading. Except for the PI/PDMS-FS composites, all composite film samples exhibited more than 86% transmittance at 550 nm. Regarding thermal properties, the glass transition temperature (Tg) and thermal stability remained stable for most composite films. In addition, PI/3-FS films demonstrated enhanced dimensional stability with lower coefficients of thermal expansion (from 47.3 to 34.5 ppm/°C). Overall, this study highlights the potential of incorporating specific modified FS particles to tailor the mechanical, optical, and thermal properties of PI composite films.

Enhanced Mechanical and Thermal Properties of Γ-Allyloxymethyl 18-Crown-6 and Polyimide Composites Through Hydrosilylation Crosslinking

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

Imparting low dielectric constant and high modulus to polyimides via synergy between coupled silsesquioxanes and crown ethers

Polyimide/Crown Ether Composite Films with Necklace-Like Supramolecular Structure and Improved Mechanical, Dielectric, and Hydrophobic Properties

Mechanical and thermal properties of synergistic modification of bismaleimide polymer composites with nano‐SiO2 and hyperbranched polyimide

Constructing high‐polarization silica for polyimide‐based nanocomposites with enhanced dielectric permittivity and mechanical performances: Molecular dynamics simulations

Enhanced performance of low-dielectric siloxane-polyimide copolymers: Synthesis and properties

Melt fluidity and thermal property of thermosetting siloxane-containing polyimide resins and their organic/inorganic hybrid characteristics

High Dielectric and Mechanical Properties Achieved in Cross-Linked PVDF/α-SiC Nanocomposites with Elevated Compatibility and Induced Polarization at the Interface

Soluble Polyimide-reinforced TGDDM and DGEBA Epoxy Composites

Effect of Isomerism on Mechanical and Tribological Properties of Thermoplastic Polyimide Films

The Fabrication and Properties of Polyimide/Silica-Alumina Hybrid Film

Enhanced Mechanical and Thermal Properties of Polyimide Films Using Hydrophobic Fumed Silica Fillers

Interface, thermal, and Fourier transform—infrared spectroscopy investigation on polylactic acid/polyhydroxyalkanoate composites with silane‐treated aluminum particles and intercalated montmorillonite inclusions for semiconductor devices

Enhanced stress transfer and thermal properties of polyimide composites with covalent functionalized reduced graphene oxide

Enhanced Dielectric Performance of Polyimide Composites with Modified Sandwich-Like SiO2@GO Hybrids

Mechanical Enhancement and Dielectric Properties of SiO 2 Contained Polyimides under High Frequency

Synthesis and Properties Comparison of Low Dielectric Silicon Containing Polyimides.

Chemically crosslinked polyimide-POSS hybrid: A dielectric material with improved dimensional stability and dielectric properties

Enhanced thermal conductivity in copolymerized polyimide

Surface Modification of Nano-Al2O3 with Silane Coupling Agent and Its Effect on the Compressive Strength of PI/Al2O3 Composites