Abstract:Shot peening (SP) can modify the surface properties of titanium alloys and titanium matrix composites (TMCs). Based on our previous work in the last ten years, the microstructure and mechanical properties of SP treated Ti-6Al-4V (TC4) and (TiB+TiC)/TC4 are summarized in this review. The compressive residual stress (CRS) was formed on the surface after SP. At different SP intensities, the thickness of the surface CRS layer was improved with increasing SP intensities. During the stress peening, the CRS increased evidently, and the increment was proportional to the prestress. Besides, CRS's thermal relaxation was investigated, which showed that the CRS in the whole deformation layer was relaxed. The relaxation mechanism could be explained by the Zener-Wert-Avrami model. The microstrain, the domain size, and the dislocation density of the peened layer were investigated using the Voigt method. The domain size of TC4 was smaller than the composite, and the microstrain of the TC4 was higher than the composite. The average dislocation density was increased after SP due to the existence of reinforcements. Utilizing the Rietveld method to analyze the microstructure after SP, the variations were similar to the Voigt method's results. Also, the composite's stability was higher than TC4 because of the existence of reinforcements. Hardness analysis revealed that the existence of reinforcements raised the hardness. In the peened layer, the surface's hardness was maximum, and it decreased with the increase in depth. At the same temperature, the hardness of the TC4 was smaller than the composite counterpart. Finally, the strengthening mechanism of SP was discussed and summarized based on the above analysis.

Investigation on Microstructure and Properties of Al18B4O33 Whisker Reinforced AlMgSi Matrix Composite after Shot Peening

Effect of Stress Shot Peening on the Microstructure and Residual Stress of Al18B4O33 Whisker Reinforced Aluminum Matrix Composite

Estimation of Microstructure and Corrosion Properties of Peened Nickel Aluminum Bronze

Effect of shot peening on surface mechanical properties of TiB 2 /Al composite

Investigation on the Residual Stress and Microstructure of (tib+tic)/ti–6al–4v Composite after Shot Peening

Investigation on the Surface Layer Characteristics of Shot Peened Titanium Matrix Composite Utilizing X-ray Diffraction

Effect of Stress Peening on Surface Layer Characteristics of (tib + TiC)/Ti–6Al–4V Composite

Thermal Relaxation of Residual Stress in Shot-Peened CNT/Al–Mg–Si Alloy Composites

Surface shot peening of cast SiCw/Al composites

Residual stress and microstructure of the CNT/6061 composite after shot peening

Surface Shot Peening of Cast SiC W /al Composites

Surface Layer Characteristics of TiB2/Al Composite by Stress Peening

Surface mechanical property and residual stress stability of nanostructured CNT/Al-Cu-Mg composites induced by shot peening

Investigation for Different Peening Techniques on Residual Stress Field of SiCw/Al Composite

Effect of Multiple Laser Shock Peening on Microstructure, Crystallographic Texture and Pitting Corrosion of Aluminum-Lithium Alloy 2060-T8

Surface characteristic and corrosion resistance of different plasma-sprayed coatings (Zn, Al6061and Zn/23Al) on S960 high strength steel with subsequent micro-shot peening

Residual Stress Distribution And Microstructure Characterization Of Particle Reinforced Titanium Matrix Composite After Shot Peening Treatment: A Review

Surface Layer Microstructures and Wear Properties Modifications of Mg-8Gd-3Y Alloy Treated by Shot Peening

Effect of shot peening on the microstructure of laser hardened 17-4PH

The influence of shot peening on mechanical properties, wear, and corrosion resistance of 42CrMo steel

Effect of Various Processes on Microstructure of CoCrFeNiAlx High-Entropy Alloy Shot Peening Layer