Highly Sensitive Strain and Temperature Sensors Based on Vernier Effect in Cascaded Mach-Zehnder Interferometer and Sagnac Interferometer
Ruyue Shi,Hailiang Chen,Xiaoya Fan,Chaoyi Liu,Hongwei Li,Zhigang Gao,Sa Zhang,Mingqi Gu,Lida Li,Yu Zheng,Shuguang Li
DOI: https://doi.org/10.1109/tim.2024.3427754
IF: 5.6
2024-01-01
IEEE Transactions on Instrumentation and Measurement
Abstract:In this article, vernier effect (VE), which is an effective method to enhance the measurement sensitivity of strain and temperature, was experimentally studied through cascading a Mach-Zehnder interferometer (MZI) with a Sagnac interferometer (SI). The MZI consisted of a tapered single-mode fiber (SMF), while the SI was formed using a panda-shaped polarization-maintained fiber (PMF). Free spectral ranges (FSRs) of the two interferometers were slightly different from each other, and as a result, the VE was successfully excited. The experimental results demonstrated that the measurement sensitivity of strain was improved from 26.7 to -110.92 pm/mu epsilon at the temperature of 24 degrees C, while the measurement sensitivity of temperature was improved from -2978 to 7934 pm/degrees C at the strain of 0 epsilon. The sensitivity was amplified about four times. The cross-sensitivity of temperature and strain measurements is 71.53 mu epsilon/degrees C. The proposed sensor exhibits in advantages of simple in construction, high sensitivity, and multiparameter measurements making it a superior contender for strain and temperature monitoring in engineering