Abstract:Aluminum alloys (AAs) have been broadly used in numerous applications due to their exceptional mechanical properties. Although AAs also exhibit outstanding resistance to general corrosion, they suffer from localized corrosion, such as pitting and crevice corrosion, and can therefore lead to unforeseen catastrophic failure. pH-sensitive smart coatings have been considered to be a promising strategy of combating the localized corrosion of AAs due to the unique self-healing capabilities. These smart coatings can sense the local pH decreases and increases induced by the anodic and cathodic reactions of AAs, respectively, thereby releasing corrosion mediating agents to the actively corroding sites on demand. However, the majority of smart coatings developed to date can only sense either acidic or alkaline condition, but not both. In this study, smart coatings that can respond to both acidic and alkaline environments are developed. These dual-pH sensitive smart coatings are based on weak polyelectrolyte coacervates consisting of polyacrylic acid and polyethylenimine or chitosan. When corrosion inhibitors such as SrCrO 4 or Ce(NO 3 ) 3 are dispersed in these coatings and subsequently immersed in aqueous solutions with different pH values, the release rates of corrosion inhibitors are much higher in the acidic and alkaline environments than that of the neutral environment. Deposition of these inhibitor-loaded smart coatings on AA2024-T3 substrates leads to a significant improvement of the corrosion resistance. Furthermore, corrosion inhibitors are also encapsulated into the core-shell particles and nanofibers through the co-axial electrospray and electrospinning techniques, respectively. The shells of the particles and nanofibers are made from the polyelectrolyte coacervates, so they are dual-pH sensitive. These particles and nanofibers are sandwiched in an organic coating matrix and applied on the AA2024-T3 substrates, forming self-healing smart coatings with substantially improved corrosion resistance as evidenced by the electrochemical impedance spectroscopy analysis. In particular, the nanofibers embedded smart coatings can repeatedly heal the intentionally scribed area of the coated AA2024-T3 owing to the transport of corrosion inhibitors from remote areas through the nanochannels created in core-shell nanofibers.

A Localized Approach to Study Corrosion Inhibition of Intermetallic Phases of AA 2024-T3 by Cerium Malate

Detailedexperimental and computational explorations of two heterocyclic compounds as corrosion inhibitors for aluminum alloy 2024-T3 in 3.5% NaCl: Electrochemical/surface studies, DFT/MD modeling

Benzotriazole and cerium chloride as corrosion inhibitors for AA2024-T3: An EIS investigation supported by SVET and ToF-SIMS analysis

An inhibitive system to mitigate the corrosion of AA2024-T3 in 3.5 wt% NaCl solution: Utilizing the synergistic effect of cerium cations and benzimidazole molecules

Cerium lactate as green corrosion inhibitor of AA2024 alloy

Corrosion inhibition analysis on cerium induced hydrophobic surface of Al-6061/SiC/Al2O3 hybrid composites

Dual pH-Sensitive Smart Coatings for Corrosion Inhibition of AA2024-T3

Preparation and Corrosion Behaviour of Cerium Based Sol-gel Composite Coatings on AA2024-T4 Aluminum Alloy

Enhanced active corrosion protection coatings for aluminum alloys with two corrosion inhibitors co-incorporated in nanocontainers

Corrosion inhibition of AA2024-T3 in alkaline solution by disodium-N-dodecyliminodiacetate: Experimental and theoretical studies

Investigation of Corrosion Inhibitor Adsorption on Mica and Mild Steel Using Electrochemical Atomic Force Microscopy and Molecular Simulations

Electrochemical Study of Corrosion Behavior of Rare Earth Based Chemical Conversion Coating on Aerospace Aluminum Alloy

Initiation and Propagation of Localized Corrosion on Cold Sprayed Aluminum Alloy 2024 and 7075

Microstructural and Electrochemical Study: Pitting Corrosion Mechanism on A390 Al–Si Alloy and Ce–Mo Treatment as a Better Corrosion Protection

High-Throughput Assessment of Inhibitor Synergies on Aluminum Alloy 2024-T3 through Measurement of Surface Copper Enrichment

Correlating corrosion modes with the microstructure of the 2XXX series alloys: A comparative approach

Effect of Delayed Inhibitor Supply on AA2024-T3 Intermetallic Activity: a local in situ analysis with reflected microscopy

Corrosion Inhibitor Screening For Aa6014 Aluminum Alloy Under Different Ambient Conditions Using A Novel Multielectrode Methodology

Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy

Enhanced long-term corrosion protection of 2A14 aluminum alloy: Hybrid effect of micro-arc oxidation coating and cerium based conversion treatment

Experimental and theoretical studies of the efficiency of metal–organic frameworks (MOFs) in preventing aluminum corrosion in hydrochloric acid solution