Abstract:In this work, Zr-doped CeO2(Ce1-xZrxO2, CZO) films with (001) preferential orientation were fabricated on biaxially textured NiW alloy substrates by using a novel sol-gel method. The precursor solutions were synthe-sized through a newly developed process using common inorganic metal salts of Zr and Ce as the starting materials instead of organic salts. The influence of annealing temperature and the Ce/Zr mole ratio in the precursor solutions on the growth texture of CZO films was investigated. The precursor solutions with the concentration of 0.3 mol/L were coated on the Ni5W substrates using a dip-coating method and then heat-treated at 1050 degrees C for an hour under a reducing atmosphere of high-purity Ar with 5 vol% H-2. The CZO thin films show excellent c-axis preferential orientation when the content of Zr in CZO thin film is less than 40%. The full width of half maximum of the phi scan of (111) reflection and omega scan of (200) reflection of CZO films is as low as the value of about 5 degrees and 6 degrees, respectively. Moreover, it is found that the inside of CZO thin film exhibits quite dense and uniform without cracks and porosity with the aid of the scanning transmission electron microscopy analysis by which the epitaxial growth relationship of (220)(czo )// (200)(NiW )between CZO and NiW is simultaneously confirmed. Finally, highly (001)-oriented YBCO film with good superconducting properties was deposited on CZO buffered NiW substrate. The above results indicate that the CZO film is a quite promising candidate of single buffer layer architecture for YBCO coated conductor.

Preparation of Biaxially Textured Ce1-x(Y0.2Zr0.8)xOδ Buffer Layers on RABiTS NiW Tapes by Chemical Solution Deposition

Reel-To-Reel Continuous Deposition Of Ce(X)Zr(1-X)O(2) Single Buffer Layer For Ybco Coated Conductors

Highly (001)-oriented zirconium-doped ceria films grown on biaxially textured nickel tungsten substrates through an inorganic-salts-based chemical solution deposition route

Preparation and Characterization of Ceo2/Ysz/Ceo2 Buffer Layers for Ybco Coated Conductors

Single Cerium Zirconate Buffer Layer on Biaxially Textured Metal Substrates for High Performance Coated Conductors

Rapid Deposition of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes

Reel-To-Reel Deposition of Epitaxial Double-Sided Y2o3 Buffer Layers for Coated Conductors

Microstructure Analysis of High-Quality Buffer Layers on Textured Niw Tapes for Ybco Coated Conductors

Uniformity of Long-Length Double-Sided CeO_2 Buffer Layer for YBa_2Cu_3O_(7-δ) Coated Conductors

Fabrication and Characterization of La2Zr2O7 Films on Different Buffer Architectures for YBa2Cu3O7−δ Coated Conductors by RF Magnetron Sputtering

Simultaneous double-sided deposition of long-length epitaxial CeO 2 buffer layers for YBCO coated conductors

Preparation of Eu0.3Ce0.7O1.85-x single buffer layer on coated conductors by chemical solution deposition

Texture and Morphology Developments of Yttria-stabilized Zirconia (YSZ) Buffer Layer for Coated Conductors by RF Sputtering

Continuous Deposition of Double-sided Y2O3/YSZ/CeO2 Buffer Layers for Coated Conductors

Fast Growth Processes of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes

Improved Textured La2Zr2O7 Buffer Layers on Bi-Axially Textured Ni–W Substrates Using CeO2 Seed Layers for YBa2Cu3O7−x Coated Conductors

Texture and Surface Morphology of Yttria-Stabilized Zirconia Buffer Layer on Ni-Based Tapes by Electron Beam Evaporation

Growth orientation and surface morphology of CeO2 films for high-Jc YBCO films on biaxially-textured Ni tape by PLD

Growth and characterization of doped CeO2 buffers on Ni-W substrates for coated conductors using metal organic deposition method

Preparation of Gd2zr2o7 Buffer Layers for Coated Conductor by Polymer-Assisted Chemical Solution Deposition

Characterisation of YSZ Layers Deposited on Y2O3 Buffered Textured Tapes for Coated Conductors