Abstract:The optimization of back contact interface is crucial to improve the performance of Cu2ZnSnS4 (CZTS) thin film solar cells. In this paper, we first employ Al-doped ZnO (AZO) as the intermediate layer into the Mo/CZTS interface to improve the quality of back contact region. This AZO intermediate layer, obtained from the sputtering method prior to the CZTS precursor deposition, initially blocks the direct contact of CZTS with the Mo layer and thus indeed suppresses the decomposition reaction between Mo and CZTS. Consequently, the generation of voids at the back contact region is obviously avoided. Besides, the AZO intermediate layer can inhibit the reaction between sulfur (S) and Mo during sulfurization process, and thus significantly reduce the thickness of MoS2. Meanwhile, the AZO intermediate layer with suitable thickness does not affect the crystal quality of CZTS absorber layer. Moreover, the effects of different thicknesses of predeposited AZO on the film morphology, composition, and corresponding device performance were systematically studied. After optimizing the thickness of the AZO layer, the efficiency of the resultant device has increased from 7.1% to 8.4% (the active area efficiency is 9.2%).The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18799?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18799</a>.XRR patterns of 15, 30, 45, and 60 nm AZO films deposited on SLG; relevant formula and description of how to calculate the film thickness from XRR mode of XRD; EDS mapping for surface of four CZTS films with 0 nm AZO, 10 nm AZO, 20 nm AZO, and 30 nm AZO and EDS mapping for cross-sectional of CZTS films with 30 nm AZO; statistical box charts of typical parameters of CZTS devices with different thicknesses of AZO at back contact region; cross-sectional SEM images of four CZTS devices with different thicknesses of AZO at back contact region; and comparison of different intermediate layers for CZTS cells (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18799/suppl_file/am0c18799_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

All‐Solution‐Processed Cu2ZnSnS4 Solar Cells with Self‐Depleted Na2S Back Contact Modification Layer

8.36% Efficient CZTS Solar Cells on Transparent Electrode Via Solution Processing

Influence of Na2S treatment on CZTS/Mo interface in Cu2ZnSnS4 solar cells annealed in sulfur-free atmosphere

All-Layer Sputtering-Free Cu2Zn1-xCdxSnS4 Solar Cell with Efficiency Exceeding 7.5%

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

All Solution-Processed Cu2znsns4 Solar Cell By Using High-Boiling-Point Solvent Treated Ball-Milling Process With Efficiency Exceeding 6%

Solution-Processed One-Dimensional ZnO@CdS Heterojunction toward Efficient Cu2ZnSnS4 Solar Cell with Inverted Structure

Synthesis and Characterization of Hydrazine Solution Processed Cu12Sb4S13 Film

Sputtering Deposited and Energy Band Matched ZnSnN2 Buffer Layers for Highly Efficient Cd‐Free Cu2ZnSnS4 Solar Cells

Back Contact Engineering to Improve CZTSSe Solar Cell Performance by Inserting MoO3 Sacrificial Nanolayers

Rational Defect Passivation of Cu2ZnSn(S,Se)4 Photovoltaics with Solution-Processed Cu2ZnSnS4:Na Nanocrystals.

Modification of Back Contact in Cu 2 ZnSnS 4 Solar Cell by Inserting Al-Doped ZnO Intermediate Layer

Improved Cu2ZnSnS4 Solar Cell Performance by Multimetallic Stacked Nanolayers

Se as hetero-nucleation seeds reinforcing intermetallic diffusion for improved electrodeposition-processed CZTS solar cells

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells

A 5.5% efficient co-electrodeposited ZnO/CdS/Cu 2 ZnSnS 4 /Mo thin film solar cell

Novel solution processing of high-efficiency Earth-abundant Cu2 ZnSn(S,Se)4 solar cells.

Realizing zinc-doping of CdS buffer layer via partial electrolyte treatment to improve the efficiency of Cu2ZnSnS4 solar cells

Environmentally Friendly Synthesis of Copper Zinc Tin Sulfide (CZTS) Thin Film Solar Cells: Advancing Sustainable Photo-Energy Conversion with Low-Temperature Chemical Processing

ZnO1−xSx Solid Solution as Potential Buffer Layer Materials for Cu2ZnSnS4‐Based Thin Film Solar Cells: Structural and Interfacial Properties

Sol-gel synthesis of Cu2ZnSnS4 thin films under mild conditions