Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Influence of Impregnated Nano-scale LaNi0.6Fe0.4O3-delta Particles on the Oxygen Permeation Performance of Zr0.84Y0.16O2-delta-La0.8Sr0.2Cr0.5Fe0.5O3-delta Composite Membranes

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Fabrication and Performance of La0.6sr0.4co0.2fe0.8o3-Delta Infiltrated-Yttria-Stabilized Zirconia Cathode on Anode-Supported Solid Oxide Fuel Cell

Infiltration of La0·6Sr0·4FeO3-δ Nanoparticles into YSZ Scaffold for Solid Oxide Fuel Cell and Solid Oxide Electrolysis Cell

Electrochemical Stability of La0.6Sr0.4Co0.2Fe0.8O3−δ-infiltrated YSZ Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Enhancement of Oxygen Permeation Through U-Shaped K2nif4-Type Oxide Hollow Fiber Membranes by Surface Modifications

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

A Novel Cobalt-Free, CO2-stable, and Reduction-Tolerant Dual-Phase Oxygen-Permeable Membrane.

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Various Influence of Surface Modification on Permeability and Phase Stability Through an Oxygen Permeable Membrane

Study of Ca3Co4O9+δ oxygen electrode with La0.6Sr0.4FeO3-δ interlayer in YSZ-based reversible solid oxide cells

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Direct CO 2 Electrolysis on Symmetric La 0.8 Sr 0.2 Cr 0.5 Fe 0.5 O 3−δ -Zr 0.84 Y 0.16 O 2−δ Electrode-Supported Solid Oxide Electrolysis Cells

A CO2-tolerant nanostructured layer for oxygen transport membranes

Advancing oxygen separation: insights from experimental and computational analysis of La0.7Ca0.3Co0.3Fe0.6M0.1O3−δ (M = Cu, Zn) oxygen transport membranes

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Fabrication and Performance of Pr-doped CeO2 Nanorods-Impregnated Sr-doped LaMnO3–Y2O3-stabilized ZrO2 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Electrical and Electrochemical Performances Evaluation of LaNi<sub>0.6</sub>Fe<sub>0.4</sub>O<sub>3</sub> Cathode Contact and Current Collecting Layer in SOFCs

Electrochemical Performance and Stability of Lanthanum Strontium Cobalt Ferrite Oxygen Electrode with Gadolinia Doped Ceria Barrier Layer for Reversible Solid Oxide Fuel Cell

Improved Performance and Stability of Ag-infiltrated Nanocomposite La0.6Sr0.4Co0.2Fe0.8O3−δ-(Y2O3)0.08(ZrO2)0.92 Oxygen Electrode for H2O/CO2 Co-Electrolysis

Conducting Property and Performance Evaluation of LNF As Cathode Current Contact Layer in Solid Oxide Fuel Cell