Abstract:Dual-layer membranes with enhanced CO2 tolerance and unprecedented oxygen permeability under CO2-containing sweep gas are reported. Specifically, a SrFe0.8Nb0.2O3-delta/Ba0.5Sr0.5Co0.8Fe0.2O3-delta (SFN/BSCF) dual-layer membrane structure has been successfully prepared by pulsed laser deposition of SFN thin layer onto polished BSCF membranes. The phase structure and microstructure of the SFN/BSCF membrane are characterized by XRD and TEM, respectively. Two distinct phases originated from SFN and BSCF are both obtained, which suggests that the SFN is in high crystallinity under the as-deposited condition and BSCF maintains its original status. TEM images clearly show that SFN nanostructured layer is compactly coating on the BSCF substrate. Oxygen permeation fluxes of 2.721, 2.276, 1.809 and 1.303 mL cm(-2) min(-1) at 900, 850, 800 and 750 degrees C are attained for a similar to 45 nm nanostructured SFN layer decorated on a 1 mm thick BSCF membrane using air as the feed and He as the sweep gas. These high oxygen permeation fluxes are comparable with the pristine BSCF membrane since SFN membrane is also a promising mixed conductor and the coated layer is extremely thin. Under He sweep gas with 10% CO2, a stable oxygen permeation flux of similar to 2.25 mL cm(-2) min(-1) at 850 degrees C is maintained for similar to 550 min with the SFN/BSCF membrane, while it is only lower than 0.4 mL cm(-2) min(-1) with the uncoated membrane. The results indicate that both high oxygen flux and stability can be simultaneously achieved with adoption a nanostructured protective layer.

Various Influence of Surface Modification on Permeability and Phase Stability Through an Oxygen Permeable Membrane

Tantalum stabilized SrCoO3-δ perovskite membrane for oxygen separation

Enhancement of Oxygen Permeation Through U-Shaped K2nif4-Type Oxide Hollow Fiber Membranes by Surface Modifications

Influence of the Preparation Methods on the Microstructure and Oxygen Permeability of a CO2‐stable Dual Phase Membrane

Advancing oxygen separation: insights from experimental and computational analysis of La0.7Ca0.3Co0.3Fe0.6M0.1O3−δ (M = Cu, Zn) oxygen transport membranes

Excellent and CO$_2$$_{0.85}$Nd$_{0.1}$Cu$_{0.05}$O$_{2-δ}$-Nd$_x$Sr$_{1-x}$Fe$_{1-y}$Cu$_y$O$_{3-δ}$ dual-phase oxygen transport membranes

A CO2-tolerant nanostructured layer for oxygen transport membranes

Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3-δ Oxygen Permeation Membrane with Three-Layer Structure

High CO2-tolerance oxygen permeation dual-phase membranes Ce0.9Pr0.1O2-δ-Pr0.6Sr0.4Fe0.8Al0.2O3-δ

High-flux dual-phase percolation membrane for oxygen separation

Novel Cobalt-Free, Noble Metal-Free Oxygen-Permeable 40Pr0.6sr0.4feo3-Δ–60ce0.9pr0.1o2−δ Dual-Phase Membrane

Oxygen Separation Through U‐shaped Hollow Fiber Membrane Using Pure CO2 As Sweep Gas

Effect of CO2 and SO2 on Oxygen Permeation and Microstructure of (pr0.9la0.1)2(ni0.74cu0.21ga0.05)o4+δ Membranes

Anion Doping CO2-stable Oxygen Permeable Membranes for Syngas Production

Effect of A Fluoro-Coating on Oxygen Transport Performance and Lifetime of A Polymer-Cobaltporphyrin Membrane

Investigation of Co–doped Ce0.8Sm0.2O2–δ–Ba0.95La0.05Zr0.1Fe0.9–xCoxO3–δDual–phase Oxygen Transport Membranes

Effects of Lanthanides on the Structure and Oxygen Permeability of Ti-doped Dual-phase Membranes

A new CO2-resistant Ruddlesden–Popper oxide with superior oxygen transport: A-site deficient (Pr0.9La0.1)1.9(Ni0.74Cu0.21Ga0.05)O4+δ

A Novel Cobalt-Free, CO2-stable, and Reduction-Tolerant Dual-Phase Oxygen-Permeable Membrane.

Dual Phase Composite Oxide of Ce0.9Gd0.1O2-δ-Ba0.5Sr0.5Co0.8Fe0.2O3-δwith Excellent Oxygen Permeation

Influence of Ln elements (Ln = La, Pr, Nd, Sm) on the structure and oxygen permeability of Ca-containing dual-phase membranes