Abstract:The microwave ceramics with compositions of Me-substituted (Pb0.45Ca0.55){[(Fe0.5Nb0.5)0.9Sn0.1]1−xMex}O3 (Me=Ti, Mn; x=0∼0.9) were prepared by solid state reaction method. A small amount of low-melting compound in Bi2O3–LiF system was added to lower the sintering temperature of the microwave ceramics. Bi2O3–LiF (5 wt.%) addition can lower the sintering temperature to lower than 950°C. The phase, microstructure and dielectric properties were investigated with XRD, SEM and impedance analyzer. (Pb0.45Ca0.55){(Fe0.5Nb0.5)0.9Sn0.1}O3 ceramics with dielectric constant values (εr) of 89 and quality factor (Q=1/tanδ) of 1578 at 500 MHz can be obtained when the sintering temperatures are in the range of 950°C. Furthermore, Ti or Mn substitution on B site in perovskite structure has significant effect on microstructure and dielectric properties. The greater the value of x, the higher the value of dielectric constant, product of quality factor and frequency (Q·f), and the size of crystal grain. Ti substitution can strongly enhance Q value. The experimental results show that samples with Ti substitution sintered at 950°C, with x=0.1, has εr=92 Q=3702 at 500 MHz. It is promising to be applied to multilayer microwave filters, which require low sintering temperature.

Low-temperature Sintered Li2(MnxTi1−x)O3 Microwave Dielectric Ceramics with Adjustable Τf

Microwave Dielectric Properties and Low Temperature Firing of (1 − X)li2zn3ti4o12 –xli2tio3 (0.2 ≤ X ≤ 0.8) Ceramics with B2O3–CuO Addition

Structure and Microwave Dielectric Behaviour of Low-Temperature-fired Li2Zn1−xCoxTi3O8 (x = 0–0.07) Ceramics for Low Temperature Co-Fired Ceramic Applications

Novel Thermal-Stable Low Temperature Sintered Ba 2 LiMg 2 V 3 O 12 Microwave Dielectric Ceramics with ZnO-P 2 O 5 -Mno 2 Glass Addition

Low-Firing Ba_4(Nd_(0.85)Bi_(0.15))_(28/3)Ti_(18)O_(54) Microwave Ceramics

Microwave Dielectric Properties of the Low-Temperature-fired Li2ZnTi3O8–Li2TiO3 Ceramics for LTCC Applications

Microwave Dielectric Properties and Low-Temperature Sintering of (zn0.8mg0.2)2sio4–tio2 Ceramics with Li2O–B2O3

Low Temperature Sintering of Li 2 (mg 0.3 Zn 0.7 )ti 3 O 8 -0.12Tio 2 Microwave Dielectric Ceramics with Controllable Grain Size

Low Temperature Sintering and Microwave Dielectric Properties of Novel Temperature Stable Li3Mg2NbO6-0.1TiO2 Ceramics

Low temperature sintering BBSZ glass modified Li 2 MgTi 3 O 8 microwave dielectric ceramics

The effect of composition on Li2(Mg0.3Zn 0.7)Ti3O8-xTiO2 microwave dielectric ceramics for low temperature co-fired ceramics technology application

Low-Temperature Cofired Ca(Li1/3nb2/3)O3-Delta Ceramics for Microwave Applications

Novel Low Temperature Sintered Li4Ti5O12 Microwave Dielectric Ceramics with MoO2 Addition

Temperature Stability of Li2TiO3‐Zn2SiO4 Microwave Dielectric Ceramics

Low temperature sintered Li6MgTiNb1-xVxO8F microwave dielectric ceramics with high-quality factor

Microwave Dielectric Properties of Temperature-Stable (mg0.95co0.05)2tio4–li2tio3 Composite Ceramics for LTCC Applications

Microwave Dielectric Properties and Low Temperature Sintering of Li 2 Zn(Ti 1−x Sn X ) 3 O 8 (x ≤ 0.20) Ceramics with B 2 O 3 –cuo Addition

Novel temperature stable Li 2 TiO 3 -based microwave dielectric ceramics with low loss

Low-fired NiO-ZnO-TiO2-Nb2O5 Dielectric Ceramics with Temperature Stable for LTCC Applications

Low-fired (PbCa) (FeNb) O3 ceramics for multilayer microwave filter applications

A new low-loss microwave dielectric ceramic for low temperature cofired ceramic applications